EAN: 707976003850
The FM+ Assistive Listening System from Williams Sound integrates professional WaveCAST Wi-Fi audio server technology, allowing end users to listen with either an FM receiver or with their own smartphone (via the WaveCAST Audio Receiver app). Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform.
The FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience. Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset. Venues no longer need to choose between providing FM or Wi-Fi assistive listening systems. FM+ supports both the new iOS and Android WaveCAST Audio Receiver apps in addition to all of the current and legacy Williams Sound FM receivers operating on the 72-76 MHz bandwidth.
Most settings can be changed via the front panel interface, or over the hosted web interface. A remote programming guide is available upon request. The FM+ uses the WaveCAST app to provide an easy-to-use, intuitive user interface. You can easily select channels and volume level once your mobile device is connected to the Wi-Fi network. (The app does not work on FM broadcasts.)
Rack Mounting
Optional RPK 005 (single) or RPK 006 (double) rack mount kits supported
Compatible Antennas
ANT 005, ANT 021, ANT 024, ANT 025 (included), and ANT 029
RF Power
Full, medium, low, or off indicated by menu icon
Sleep Mode
RF sleep mode starts when audio is below -18 dB level and with no button pressed for selected duration
Audio Level Indicators
10-LED array that reads -18 to 9 dB at 3 dB intervals
Williams Sound PPA R37 N Select Channel FM Receiver (No Earphone/Batteries)
EAN: 707976002792
The PPA R37 N Select Channel FM Receiver (No Earphone/Batteries) from Williams Sound is a compact and easy-to-use beltpack receiver that allows you to listen to an FM signal in the 72-76MHz band. The receiver offers seek button channel selection between 17 pre-set frequencies, which are digitally synthesized for terrific audio clarity and signal stability. It also features a channel lock capability to prevent accidental changes.
The receiver has an ergonomic design with a detachable belt clip, allowing you to slip it into your pocket or conveniently clip it to your clothing. The standard-sized 3.5mm headphone jack is compatible with mono and stereo headphones and earphones, and also supports induction neckloops and telecoil-equipped hearing aids. The receiver operates on a pair of standard alkaline AA batteries (sold separately). A sleep mode helps to preserve battery life.
This receiver requires a transmitter operating on a 72-76MHz band. Compatible Williams Sound transmitters: PPA T35, T27, T32, and T36. This receiver is approved by the FCC for operation in US Markets. The receiver cannot be used in all countries. Check with your government s radio regulations for 72-76MHz operation.
You must supply your own earphones/headphones and AA batteries.
Ideal for assisted listening applications in schools, houses of worship, auditoriums, theaters, and more
Compact and easy-to-use design allows you to listen to an FM signal in the 72-76MHz band
The receiver s seek button lets you choose between 17 pre-set frequencies, which are digitally synthesized for terrific audio clarity and signal stability. The channel lock capability prevents accidental changes to channel settings
The ergonomic design and detachable belt clip allow you to slip it into your pocket or conveniently clip it to your clothing
The standard-sized 3.5mm headphone jack is compatible with mono and stereo headphones and earphones, and also supports induction neckloops and telecoil-equipped hearing aids
Operates on a pair of standard alkaline AA batteries (sold separately). A sleep mode helps to preserve battery life
Williams Sound EAR 022 Surround Earphone
EAN: 707976051660
The Williams Sound EAR022 is a single-sided, clip-on earphone ideal for use with personal listening devices. The clip is designed to fully surround the ear for maximum stability and comfort. The monaural 1/8 mini-plug is compatible with a wide variety of devices.
- Hangs on outside of the ear
- Plug: 1/8 mono
- Cord: 3.3
- Monaural
- 32 Ohms
- Recommended for FM receivers and select IR receivers
- Designed for individuals with mild and low gain hearing loss
Williams Sound NKL 001 Induction Neckloop for T-Switch Hearing Aids
The Williams Sound NKL 001 is an induction neckloop designed to magnetically couple an audio signal to a telephone coil-equipped (T-Switch) hearing aid. The neckloop has a standard 1/8 mini plug that can be connected to any audio device that has an 8-16 Ohm 1/8 output, such as a beltpack receiver, TV, tape player, etc. The neckloop has a slider so you can adjust the tension, and the 18 cord provides a good amount of slack for use with body-worn devices.
- Integrated safety breakaway device
- Cord Length: 18
- Adult size
- Connector: 1/8 mono plug
- Monoaural
- Impedance: 8 to 16 Ohms
- Recommended for FM receivers and select IR receivers
- For individuals with moderate to severe hearing loss
Williams Sound CHG 3502 Dual-Bay Battery Charger& 4 AA Rechargeable Batteries for Select Bodypack Transmitters and Receivers (Black)
The black CHG 3502 Dual-Bay Bodypack Battery Charger from Williams Sound is used for charging select Williams Sound T36, T46, R37 and Motiva bodypack transmitters and receivers. The two-bay charger allows you to simply dock the components and recharge the NiMH batteries inside without removing them. This configuration includes four AA-size NiMH rechargeable batteries.
The charger s plastic chassis features a red LED for each bay that indicates the battery is being charged. Note that you must have NiMH batteries installed and the components must be set to the NiMH setting. It takes 16 hours to fully recharge the batteries, and it s safe to leave the units in the charger even after the batteries have fully charged.
Compatible with
- PLR BP1 loop receiver
- PPA R37 FM receiver
- PPA R37-8 FM receiver
- PPA R38 FM receiver
- PPA T46 FM transmitter
- WIR RX 22-4 infrared receiver
- Motiva PFM T36 personal FM transmitter
- Motiva PFM R36 personal FM receiver
- Motiva PFM R33 personal FM receiver
Williams Sound ANT005 - Remote Coaxial Antenna for 72-76 MHz PPA Transmitters
The Williams Sound ANT005 is a 22 coaxial antenna designed to be used with any personal PA system or large-area FM transmitter that operates at 72 to 76 MHz. It provides the system with a maximum operating range.
- For Use with: PPA T45,PPA T45NET, PPA T27 transmitters
- Connector Type: F-connector
- Cable Type: RG 59 coax
- Nominal Impedance: 75 Ohms
- Total Cable Length: 22
- Active Antenna Length: 80
- Compatible with optional 50 antenna extension
Williams Sound IDP008 - ADA Wall Plaque for Hearing Assistance
The IDP008 from Williams Sound is a self-adhesive wall plaque that alerts your patrons to the fact that your establishment has a hearing assistance system. Perfect for theaters, auditoriums, and more, the plaque is large and easy-to-see.
Williams Sound RPK005 - Rack Mount Kit for Half Rack Products
EAN: 707976050861
The RPK005 from Williams Sound is a rack mounting kit that allows you to mount 1/2 rack space products in a standard audio rack.
Williams Sound FM+ Assistive Listening System Specs
| Display | 3.1" / 7.9 cm OLED |
| Ethernet | 1 x RJ45, 10/100 Base-T IEEE 802.3 Compliant |
| Operating Frequency | 72.1 to 75.9 MHz (17 Wideband Channels) |
| Frequency Accuracy | ±2 ppm Stability, 32 to 122°F / 0 to 50°C |
| Deviation | ±75 kHz Maximum |
| Pre-Emphasis | 75 ¼s |
| RF Field Strength | 80 mV/m at 9.8` / 3 m |
| Transmission Range | Up to 1000` / 305 m with Optional ANT 005 Antenna on Rear Chassis Connector |
| RF Outputs | 1 x #10-32 Stud Connector (Center) 1 x F-Connector (Rear) |
| RF Indicator | Green LED On Air Indicator |
| RF Time Out (Sleep Mode) | Duration: 30 Minutes / 4 Hours / Always On |
| Audio Processor | DSP Based Compression: 1:1, 1.5:1, 2:1; High-Pass / Low-Pass Filter Frequency Control |
| Audio Frequency Response | 31-16,000 Hz, ±3 dB (Re: 1 kHz, ±3 dB) |
| Signal-to-Noise Ratio | 67 dB (Typical) Transmitted RF |
| Total Harmonic Distortion | <0.25% at 1 kHz (RF Output) |
| Common Mode Rejection | >57 dB at 1 kHz, Mic or Line |
| Audio Inputs | 1 x Combination 3-Pin XLR / 1/4" (TRS) for Balanced/Unbalanced Line Level, or Balanced/Unbalanced Microphone with Selectable Phantom Power |
| Audio Input Gain | 0 to -50 dB, in 1 dB Steps |
| Phantom Power | 14.4 VDC Through 2.2 kOhms Resistors to Analog Combo Jack: Pin 2 and Pin 3 on XLR Jack, or Tip and Ring on 1/4" TRS Jack |
| Headphone Output | 1/4" TRS Stereo Jack, Mono Signal, 14.85 mW at +9 dB, Maximum in 33 Ohms (0 to -40 dB Menu Adjustment in 2 dB Steps) |
| Line Output | RCA Jack, -10 dBV (.32 VRMS) Output Impedance: 100 Ohms at 9 dB |
| Microphone | -55 dBV (1.7 mV RMS) 22 dBV (80 mV RMS) +20 dBV (10.0 V RMS) |
| Line | -25 dBV (55 mV RMS) +16 dBV (6.3 V RMS) +20 dBV (10.0 V RMS) |
| Approvals | FCC, RoHS3, WEEE, Industry Canada |
| Power | Input: 100-240 VAC, 50/60 Hz Output: 24 VDC, 750 mA, 18 W |
| Rack Size | 19" Standard One EIA Rack Space High 1/2 Space Wide |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -4 to 158°F / -20 to 70°C |
| Dimensions | 8.47 x 8.27 x 1.73" / 21.5 x 21 x 4.4 cm |
| Weight | Transmitter: 3.2 lb / 1.45 kg |
Packaging Info
| Package Weight | 5.045 lb |
| Box Dimensions (LxWxH) | 13.1 x 10.5 x 3.5" |
Williams Sound PPA R37 N Select Channel FM Receiver (No Earphone/Batteries) Specs
| Channels | 17, Accessed via Seek Button in Battery Compartment |
| Operating Frequency | 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9MHz 75kHz Intermediate Frequency |
| Deviation | 75kHz |
| De-Emphasis | 75µS |
| Range | AFC Range: ±120kHz |
| Sensitivity | 2µV @ 12dB Sinad with Quelch Defeated |
| Max Input Signal | 100mV |
| Frequency Response | 200Hz - 15kHz |
| Modulation | FM, ±75kHz Peak Deviation |
| Signal to Noise Ratio | 65dB Min @ 100µV |
| Output Level | 35mW Max, Peak into 16 Ohms |
| Connectors | 3.5mm Stereo/Mono Headphone Jack |
| Antenna | Uses Earphone/Headphone Cord as Antenna |
| Battery | 2 x AA Alkaline or NiMH Up to 50 Hours Life with Alkaline, Up to 32 Hours with Rechargeable NiMH Enters Sleep Mode After 6 mins with no RF Signal |
| Current Consumption | 52mA, Nominal |
| Indicators | Green Power LED (Flashes for Low Battery) |
| Temperature Range | 32 to 122°F (0 to 50°C) |
| Approvals | FCC, Industry Canada, RoHS, WEEE |
| Finish | Black |
| Dimensions | 4.1 x 2.85 x 1.38" (104 x 72 x 35mm) |
| Weight | 4.6 oz (130g) (With Batteries) 2.6 oz (73g) (Without Batteries) |
Packaging Info
| Package Weight | 0.17 lb |
| Box Dimensions (LxWxH) | 4 x 3 x 1" |
Williams Sound EAR 022 Surround Earphone Specs
| Style | Around-ear speaker |
| Plug | 1/8" / 3.5 mm mono |
| Driver Size | 0.9" / 23.0 mm |
| Nominal Impedance | 32 Ohms |
| Frequency Response | 20 Hz to 20 kHz |
| Power Input | 30 mW |
| Sensitivity | 118 dB @ 1 kHz |
| Cord Length | 39.0" / 99.1 cm |
| Weight | 0.5 oz / 15.0 g |
Packaging Info
| Package Weight | 0.055 lb |
| Box Dimensions (LxWxH) | 3.6 x 3.1 x 0.85" |
In the Box
- Williams Sound ANT025 Telescoping Whip Antenna for T45 Transmitter (39")
- Williams Sound WCA 013 RCA Audio Cable (3`)
- Williams Sound WLC 004 3-Pin US Main Power Cord for CHG 3512 Charger, IC-2 Control Console, and WIR TX75 Transmitter (Black, 7.5`)
- TFP 048 Power Supply
- 2-Year Manufacturer Warranty
- Belt Clip
- 2-Year Manufacturer Warranty
- Williams Sound TFP 041 Power Supply for CHG 3502
- 2 x Williams Sound Rechargeable AA NiMH Batteries (1500mAh, 2-Pack)
No posts found
