Sennheiser TeamConnect SL Ceiling 2 Microphone Array
The TeamConnect SL Ceiling 2 Microphone Array from Sennheiser is designed to provide better audio quality for voice and video conferences. It features adaptive beamforming technology that automatically follows the active speaker s voice, letting people speak naturally whether they are sitting, standing, or walking around the room.
TeamConnect Ceiling 2 offers great versatility and interoperability with support for Dante networks and POE (Power over Ethernet). It is compatible with Sennheiser s Control Cockpit software for efficient remote management and offers remote configuration and monitoring via an open media control protocol (API), allowing for easy integration into media systems. A 3-pin Phoenix connector and eight self-adhesive rubber feet are also included.
Ceiling microphone array with patented automatic speaker position detection and dynamic beamforming for best speech intelligibility
Analog and digital (Dante) audio outputs for easy connectivity to video and audio conference systems
Configuration and monitoring via Sennheiser´ s Control Cockpit software
Open API for media and camera control applications
Several installation options via suspension kit, flush mount or surface bracket (sold separately)
EAN: 615104311893
Sennheiser SL CM EB US Extension Brackets
The SL CM EB US Extension Brackets from Sennheiser is an accessory for the TeamConnect Ceiling Mic 2 (sold separately). It allows the ceiling mic to be installed flush mount in a 2 ceiling grid and extends the housing size from 1.94 to 1.98 . It includes four metal angle brackets, and four housing screws.
EAN: 615104319950
Sennheiser TeamConnect SL Ceiling 2 Microphone Array Specs
| Audio Output | 1 x 3-Pin Terminal (Fits Phoenix Contact MCVW 1.5-3-ST-3.81) 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary) |
| Ethernet Control | 1 x RJ-45 Ethernet Port for PoE Power Supply and Data/Control Communication |
| Supply Voltage | 44 to 57 VDC PoE IEEE 802.3af Class 3 |
| Power Consumption | Maximum 8.8 W |
| Plenum Rating | Tested According to UL 2043 |
| Transducer Principle | Pre-Polarized Condenser Microphone |
| AF Frequency Response | 160 Hz to 18 kHz |
| Sensitivity | 0 dBV/Pa (988 mV/Pa) |
| Signal to Noise Ratio | 83 dB (A) |
| Latency | 4 ms |
| Equivalent Noise Level | 11 dB (A) |
| Polar Pattern (Microphone) | 28 Capsules |
| Pick Up Pattern | Beam Pattern |
| Max Sound Pressure | 104 dB SPL |
| Dynamic Range | 93 dB (A) |
| Temperature | Operation: 32 to 104°F / 0 to 40°C Storage: 14 to 140°F / -10 to 60°C |
| Humidity (Relative) | 20 to 95% Non-Condensing |
| Dimensions | 23.2 x 23.2 x 1.7" / 59 x 59 x 4.3 cm |
| Weight | 12.5 lb / 5.7 kg |
Packaging Info
| Package Weight | 18.73 lb |
| Box Dimensions (LxWxH) | 27.4 x 27.4 x 5.3" |
Sennheiser SL CM EB US Extension Brackets Specs
| Compatible with | Sennheiser TeamConnect Ceiling Mic 2 |
| Dimensions | Not Specified by Manufacturer |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 3.885 lb |
| Box Dimensions (LxWxH) | 25.2 x 4.3 x 3" |
In the Box
- 3-Pin Phoenix Connector
- 8 x Self-Adhesive Rubber Feet
- 2-Year Manufacturer Warranty
- 4 x Metal Angle Brackets
- 4 x Housing Screws (M3X8 Torx T10)
- 2-Year Manufacturer Warranty
No posts found
