EAN: 707976050502
The Williams Sound IC-2 Interpreter Control Console is ideal for use with Williams Sound FM, IR, and Digi-Wave transmitters. Well suited for both fixed installation and portable applications, the IC-2 gives interpreters a full control set and flexible routing possibilities.
The IC-2 is capable of simultaneous interpretation of one or more languages, and it allows one or two interpreters to monitor floor or relay sources. Interpreters can easily activate microphone inputs, and route the interpretation signal to one of two language groups. The IC-2 is designed to meet international standards for portable interpretation consoles.
New Cat 5 audio offers simplified cabling and easy cascading to support additional interpreters.
Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup.
Floor language feed-through
Interlocking microphone and relay output functions
Soft-touch buttons provide for smoother, quieter operation
Individual volume and tone controls ensure optimal listening levels
Easy and lightweight to ship
Enhanced flexibility, providing each interpreter with multiple microphone and headset options
Williams Sound IC-2 Specs
Connections | Floor In: XLR 3-Pin Female, Balanced (or Unbalanced) Input with 24 Kilohms Differential Input Impedance, +19 dBu (Max Balanced) IC-2 Bus In/Out: Cat 5 8p8c RJ45, Distributes Balanced Line-Level Floor and Relay Audio to Another IC-2 XLR Microphone Inputs: XLR 3-Pin Female, Balanced (or Unbalanced) Input Switchable 12 VDC Simplex Power Variable Gain of 58 dB, 2.4 Kilohms Balanced Input Impedance, +19 dBu (Max Balanced) 3.5 mm Microphone Inputs: Stereo 3.5 mm TRS Phone Jack Stereo 3.5 mm TRRS Phone Jack, Unbalanced (R, S) for Electret Condenser Mics Variable Gain of 40 dB, 3.7 VDC Bias through 2.7 Kilohms 3.5 mm TRRS Headphone Output: Tip = Left, Ring 1 = Right, Ring 2 = GND, Sleeve = Mic 40 mW Max Power into 32 Ohms Stereo Headset 3.5 mm Headphone Output: Mono or Stereo Headphone, 8 Ohms Minimum 190 mW Max Power into 32 Ohms Stereo Headset Norm Out, Relay Out: 3-Pin XLR Male Jack, Balanced, +19 dBu Max into 600 Ohms |
Controls | Volume: Left and Right Rotary, Controls Headphone Volume Bass and Treble Tone: Left and Right Rotary with Center Detent, Controls Headphone Bass and Treble Tone Levels Mute: Push Button, Backlit Red, Mutes Left and Right Mics while Pressed Mic On: Push Button, Backlit Bright Red, Activates Microphone. Right and left Mic On Buttons Are Interlocked; Mic Can Only Be Turned On if the Other Is Off Floor Input, Relay Input: Push Buttons, Backlit Blue, Select Listening Language Group. Listening Modes Are either/or: Turning One On Disables the Other Relay Output: Push Button, Backlit Yellow, Selects Microphone Output Language Group: Light On = Relay Out, Light Off = Norm Out Gain Adjust: Rotary Gain Pots Control Level of Microphone and Floor Audio Phantom Power: Slide Switch Enables 12 VDC Simplex Power to XLR Microphone Norm Feedthrough: Slide Switch Enables Floor Feedthrough to Norm Out XLR Jack Relay Feedthrough: Slide Switch Enables Floor Feedthrough to Relay Out XLR Jack Ground Lift: Slide Switch Disconnects Chassis and Audio Grounds Internal to the Console |
Frequency Response | 45 Hz to 20 kHz, +0/-3 dB re: 1 kHz with Flat Bass/Treble |
Crosstalk | > 63 dB @ 1 kHz |
Tone | Bass: +12 dB Boost or -12 dB Cut at 100 Hz Treble: +12 dB Boost or -12 dB Cut at 10 kHz |
Signal to Noise Ratio | > 82 dB @ 1 kHz |
THD & Noise | < 0.5% THD at Full Power |
Indicators | Peak Level Indicator: Green LED on Back Panel Indicates Optimal Audio Output Level on Norm Out XLR When Blinking Relay Output in Use Indicator: Yellow LED on Front Panel Indicates When Relay Output Is in Use |
Power | External Power Supply, 18 VDC Desktop Style Switching Inverter, 110-240 VAC, 50/60 Hz, 1 A |
Dimensions | 10 x 6.35 x 2.45" / 25.4 x 16.1 x 6.2 cm |
Weight | 3.4 lb / 1.5 kg |
Packaging Info
Package Weight | 5.7 lb |
Box Dimensions (LxWxH) | 14.6 x 10.4 x 4" |
In the Box
- Williams Sound IC-2 Interpreter Control Console (U.S.)
- U.S. Power Supply
- 2-Year Manufacturer Warranty
No posts found