Shure MXA902 Overview
Shure MXA920-R Microflex Advance Round Ceiling Microphone Array (Black)
The black Shure MXA920-R is a round ceiling array microphone that is easy to use and quick to deploy for AV conferencing, camera tracking, voice lift, or sound reinforcement applications. The unit offers a powerful feature set, including Automatic Coverage and Steerable Coverage technology, that focuses audio capture to make sure everyone gets heard clearly for more productive meetings and presentations.
How It Works
- Automatic Coverage technology captures the talkers you want to hear while avoiding sounds in other areas, without aiming pickup lobes
- Out of the box, the MXA920 covers up to a 30 by 30' seating area with no setup at all
- To capture talkers only in specific locations, drag and drop up to 8 adjustable coverage areas using the built-in web interface
- Capture simultaneous talkers in different areas at the same time
- You can also turn Automatic Coverage technology off and use Steerable Coverage technology to place 8 pickup lobes with 8 individual audio outputs, plus an automix-just like an MXA910
- Onboard IntelliMix DSP applies automatic mixing, echo cancellation, noise reduction, and automatic gain control for a pristine audio mix
Powerful Features
- Next-generation array architecture delivers enhanced low-frequency directionality and natural, intelligible speech quality
- Advanced talker localization algorithm instantly reports the exact position of each talker for the most accurate camera tracking possible
- Precise coverage control provides exceptional isolation between microphone lobes and loudspeakers, guaranteeing the maximum sound level possible in voice lift and sound reinforcement applications
- In larger spaces, Designer System configuration software helps you configure MXA920's with other Microflex Ecosystem devices
- Choose Teams-certified bundles with the ANIUSB-MATRIX, P300-IMX, or IntelliMix Room DSP and MXN5C networked loudspeaker
Quality Details
- Square and round form factors meet the architectural needs of today's meeting spaces
- White, black, and aluminum finishes to complement your interior design all paintable for custom needs
- Certified for use with Microsoft Teams and compatible with popular collaboration tools
- Audio, PoE power, and control signals connect via Dante/AES67 digital audio networking over a single cable
- Shure Audio Encryption keeps meeting content secure between the MXA920 and other Microflex ecosystem devices in the room
- LED status bar with configurable colors and brightness
- Command strings enable seamless integration with third-party camera and room control systems
Certification Required
Shure requires completion of their certification program tailored for both existing and prospective customers in the integrated systems market to purchase this item. The certificate is also required to purchase the following products:
- MXA310 Table Array Microphone
- MXA710 Linear Array Microphone
- MXA901 Conferencing Ceiling Array Microphone
- MXA902 Ceiling Array Microphone and Loudspeaker
Shure P300 IntelliMix Audio Conferencing Processor
The Shure P300 IntelliMix Audio Conferencing Processor is designed to work with the Microflex Wireless (MXW) system to deliver eight channels of acoustic echo cancellation, DSP-processing, and level control for conference rooms and meeting spaces. The processor supports Microflex wireless microphones while also offering versatile input and output connectivity options that allows users to incorporate loudspeakers, computers, mobile devices, and other audio components.
The P300 provides Dante (10 in/8 out), and to connect analog devices, the unit provides two 3-pin block connector inputs and two 3-pin block connector outputs along with a 3.5mm input jack for mobile devices. The USB Type-B port lets you connect computers and other USB devices, while the RJ45 port supplies the unit with power and connects it to other access points in the conference system network.
Clear Audio for Conferences, Panels, and Meetings
Streamline the audio experience for every discussion. Fixed architecture provides simple setup, requiring less DSP programming and commissioning time. Multiple connectivity options allow for seamless integration with Shure conferencing microphones, laptops, and even mobile devices. Easy, rackless mounting enables quick, compact integration behind a display, under a table, or in a credenza.
Clever Operation
Intuitive, programming-free LED mute sync functionality with leading third-party software codecs including Zoom Rooms, Microsoft Teams and Skype for Business.
Scale Up
Easily add a presenter mic or control additional zoned loudspeakers with onboard matrix mixing for sound reinforcement applications
Connect with Confidence
Driverless USB audio connection to PCs for soft codecs. Analog I/O for hard codecs. 3.5 mm connection to mobile phones to bridge a remote caller. Design projects offline with Designer System Configuration Software for simple project management. Seamlessly compatible with Microflex Advance and Microflex Wireless conferencing microphones for a complete Shure ecosystem.
Meet In Confidence
Shure Audio Encryption utilizes AES-256 technology to protect confidential content.
Quality Details for Ease of Use
- Compatible with Dante Domain Manager / Device Lock
- Discretely mounts underneath a table or behind a display
- Versatile connectivity and powerful DSP for AV conferencing
- Easily setup and deploy settings with Designer System Configuration Software
- Monitor and manage with SystemOn Audio Asset Management software
- PoE+ powered eliminates the need for an outboard power supply
EAN: 042406525206
Shure MXN5W-C Networked Ceiling Speaker with Dante (White)
The white Shure Microflex MXN5-C Networked Ceiling Loudspeaker is a discreet conference speaker designed to be permanently installed in a boardroom or conference space ceiling. A single cable provides power (PoE and PoE+) and carries encrypted audio and control data, providing high-quality speech reproduction for AV conferencing applications in a low-profile design optimized for easy installation in drop ceiling configurations. The MXN5-C integrates seamlessly with other Shure-networked, PoE-enabled audio devices using the Dante audio networking protocol.
The active loudspeaker includes a built-in amplifier and uses a 2-way driver with a 5.25" woofer tuned to deliver clear, intelligible speech over a 120 Hz to 20 kHz range, while a set of integrated computer-controlled DSP functions help to ensure ideas are properly communicated and meetings are productive.
Software-Based Configuration and Control
- Software-based configuration and control
- Design and deploy every device in your audio chain with Shure Designer System Configuration software
- SystemOn Audio Asset Management software for remote management and troubleshooting
- Shure Audio Encryption
- Dante Domain Manager compatible
- AES67 compatible
Loudspeaker Technical Elements
- Pre-tuned frequency response optimized for voice intelligibility in AV conferencing applications
- Low-profile, shallow-can design compatible with most drop ceiling installations
- 2-way driver system with 5.25" woofer
- PoE/PoE+ enabled, eliminating the need for an outboard amplifier
- Integrated Shure DSP Utilities: EQ, delay, limiter, and signal/tone generator
- 2 Dante inputs and 1 Dante output
Clean Design Elements
- Aesthetic design subtly blends into drop ceiling environment
- Removable magnetic and paintable grille seamlessly covers the entire loudspeaker
- Removable magnetic Shure logo
- UL 2043 plenum rated
- A-MXN5-TB Tile Bridge or A-MXN5-NCB New Construction Bracket accessories (both available separately) provide quick and easy mounting
EAN: 042406619370
Shure A-MXN5-TB Tile Bridge for MXN5W-C Speaker
The Shure A-MXN5-TB is a tile bridge that allows for quick and easy installation of the MXN5-C Networked Loudspeaker in a drop ceiling.
EAN: 042406619493
Shure MXA920-R Microflex Advance Round Ceiling Microphone Array (Black) Specs
General
Compatibility | Shure Microflex Advance |
Inputs / Outputs
Audio I/O | 1x RJ45 Output |
Power
Power Source | PoE |
Power Consumption | 10.1 W (Maximum) |
Environmental
Environmental Protection | Dust-Resistant (IP5X) |
Certifications | FCCClass B Digital, Part 15, CANICES-003, CE |
Operating Temperature | 20 to 104°F / -6 to 40°C |
Storage Temperature | -20 to 165°F / -28 to 73°C |
Physical
Mounting | Back: Multiple Ceiling Mount |
Color | Black |
Dimensions | 25 x 2.4" / 635.4 x 61.3 mm |
Weight | 12.7 lb / 5.8 kg |
Packaging Info
Package Weight | 16.525 lb |
Box Dimensions (LxWxH) | 30.5 x 29.2 x 5" |
Shure P300 IntelliMix Audio Conferencing Processor Specs
Audio
Frequency Response | 20 Hz to 20 kHz (+1, -1.5 dB) |
Dante Digital Audio | Sampling Rate: 48 kHz Bit Rate: 24 Bit |
USB Audio | Sampling Rate: 48 kHz Bit Rate: 24 / 16 Bit |
Latency | Firmware 4.1 and Newer: Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms Dante 9-10 In to Dante Out: 3.4 ms Analog In to Analog Out: 3.8 ms Firmware 3.1 and Older: Dante 1-8 In to Dante Out (AEC Enabled): 12.5 ms Dante 1-8 In to Dante Out (AEC Disabled): 5.8 ms Dante 9-10 In to Dante Out: 1.8 ms Analog In to Analog Out: 2.2 ms |
Acoustic Echo Cancelling | Tail Length: Up to 300 ms |
Analog Connections | Block Connectors: Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 113 dB, Dante to Analog: 117 dB Equivalent Input Noise (20 Hz to 20 kHz, A-Weighted, Input Terminated with 150 Ohms): Line -86 dBV, Aux -98 dBV Total Harmonic Distortion at 1 kHz, 0 dBV Input, 0 dB Analog Gain: <0.05% Common Mode Rejection Ratio (150-Ohm Balanced Source @ 1 kHz): > 50 dB Input Impedance: 9.6 Kilohms Input Clipping Level: Line +27 dBV, Aux+15 dBV Output Impedance: 80 Ohms Output Clipping Level: Line +20 dBV, Aux +0 dBV, Mic -26 dBV |
Mobile | Connector: 1/8" / 3.5 mm Pin Assignments: Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone) Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 99 dB, Dante to Analog: 90 dB Total Harmonic Distortion (at 1 kHz, 0 dBV Input, 0 dB Analog Gain): <0.05% Input Impedance: 3.7 Kilohms Input Clipping Level: +4 dBV Output Impedance: 1.4 Kilohms Output Clipping Level (Output Terminated with 2.2 Kilohms): -20 dBV |
General
Analog Input | 2 x 3-Pin Block Connector (Active Balanced) 1 x 1/8" / 3.5mm TRRS Input |
Control Software | Shure Designer |
Analog Output | 2 x 3-Pin Block Connector (Impedance Balanced) |
USB | USB 2.0, Type B Single Port Carries 2 Input and 2 Output Channels (Summed Mono) |
Network Connection | 1 x RJ45 10 x Dante Inputs 8 x Dante Outputs |
Networking | Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended) |
Polarity | Non-Inverting, Any Input to Any Output |
Power Requirements | 802.3 at Type 2 (PoE Plus), Class 4 |
Power Consumption | 17.5 W, Maximum |
Thermal Dissipation | Maximum: 17.5 W (60 BTU/Hr) Typical: 14.6 W (50 BTU/Hr) |
Operating Temperature Range | 20 to 122° F / -6.7 to 50° C |
Storage Temperature Range | -20 to 165° F / -29 to 74° C |
Dimensions | 1.6 x 8.3 x 8.9" / 4 x 21 x 22.6 cm |
Weight | 3.8 lb / 1.71 kg |
Packaging Info
Package Weight | 5.6 lb |
Box Dimensions (LxWxH) | 12.6 x 11.9 x 3.3" |
Shure MXN5W-C Networked Ceiling Speaker with Dante (White) Specs
General
Compatibility | Shure Microflex Advance MXA920 / Microflex Advance MXA910 / Microflex Advance MXA710 / Microflex Advance MXA310 / Microflex P300 / Microflex ANIUSB-MATRIX / Microflex MXN5-C / Microflex Advance MXA Network Mute Button / Microflex IntelliMix Room / Microflex Shure Designer Software |
Inputs / Outputs
Audio I/O | 1x RJ45 Input/Output |
Frequency Response | 120 Hz to 20 kHz (- 3dB) |
Maximum Output Level | Power over Ethernet (PoE): 92 dB SPL PoE Plus: 98 dB SPL (at 3.3" / 1 m) |
DSP | Delay, Limiter, Signal Generator, Equalizer (4-Band Parametric) |
Latency | 1.5 ms (Not Including Dante Latency) |
Angle of Coverage | -6 dB at 2 kHz: 180 Degrees -6 dB at 10 kHz: 107 Degrees |
Maximum Output Level | Power over Ethernet (PoE) at 3.3' / 1 m: 92 dB PoE Plus at 3.3' / 1 m: 98 dB SPL |
Power
Power Source | PoE |
Power Consumption | 24 W (Maximum) |
Environmental
Environmental Protection | No |
Certifications | PlenumUL2043, CANICES-003(B)/NMB-003(B), CE |
Operating Temperature | 20 to 104°F / -6 to 40°C |
Storage Temperature | -20 to 165°F / -28 to 73°C |
Physical
Mounting | Back: Multiple Ceiling |
Color | White |
Cable Length | Not Specified by Manufacturer |
Dimensions | 12 x 12 x 4" / 304.8 x 304.8 x 101.6 mm |
Weight | 6.5 lb / 2.95 kg |
Packaging Info
Package Weight | 10.57 lb |
Box Dimensions (LxWxH) | 14.4 x 14 x 6.2" |
Shure A-MXN5-TB Tile Bridge for MXN5W-C Speaker Specs
General
Compatibility | Shure Microflex MXN5-C Networked Loudspeaker |
Environmental
Environmental Protection | No |
Physical
Color | Gray |
Dimensions | 23.5 x 15.1" / 596.9 x 383.5 mm |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 3.79 lb |
Box Dimensions (LxWxH) | 23.6 x 15.7 x 0.9" |
In the Box
- 8 x Cable Tie
- 3 x Strain Relief Tab
- 2-Year Manufacturer Warranty
- Half-Rack Mounting Bracket
- USB Cable
- 2-Year Manufacturer Warranty
- Magnetic Grille with Removable Shure Logo
- Flexible Conduit Clamp
- Cover Plate
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found