Alzatex ALZM04B Overview
Set up a timer in your broadcast booth, Toastmasters, or other timed setting with the from Alzatex. The system is composed of a wireless count up/down timer, a wireless large four-digit LED wall display, a wireless indicator lamp module, and 12 VAC power supplies for all three components.
The timer has controls to set the LED to Hour:Min or Min:Sec, or 12 or 24-hour time of day. The LED indicator features red, yellow, and green LEDs to match Toastmaster basic requirements, and it can also be custom programmed. It also features a beeper that can be turned on and off to indicate time is up. A reference guide and wiring diagram are also included.
Alzatex Wireless 2.4 GHz Count Up/Down Timer/Clock
This Alzatex Wireless 2.4 GHz Count Up/Down Timer/Clock has a large, 1" tall, solid LED display. Mount this unit to a wall or set it on a desktop. Run the unit as a time-of-day clock, or use it as either a count up or count down timer. It accepts three presets, and supports RS422 transmission and reception.
EAN: 788581659656
Alzatex Wireless 2.4GHz Tabletop Red/Yellow/Green Indicator
The Alzatex Wireless 2.4GHz Tabletop Red/Yellow/Green Indicator features a wireless 2.4GHz transceiver and is equipped with red, yellow, and green audience signal lights and a built-in internal loud beeper. The black ABS-plastic enclosure has three dome LEDs, each measuring 1/2" in diameter, designed in a specific color to cue the audience or participating subject on when to talk (green), wrap up (yellow), or completely stop engaging (red). The unit boasts an RJ45 modular connector for RS-422 serial data input and RJ11 modular connectors for serial data input. A separately available transformer is required for providing the 10-13 VAC or 12-15 VDC needed for operation.
Features at a Glance
- Red-yellow-green audience signal lights
- Works with TimeKeeper, Alzatex's zero to 99.59 minute count up/down timers
- Built-in internal loud beeper can be enabled or disabled using TimeKeeper
- May be powered using AC or DC power
- Low power consumption
EAN: 788581659687
Alzatex Wall Transformer with 2.1 x 5.5mm Right-Angle Connector
This Wall Transformer with 2.1 x 5.5mm Right-Angle Connector from Alzatex converts US power (120 VAC at 60 Hz) to 12 VAC. This wall wart features a two-prong Edison plug for input power, and a 2.1 x 5.5mm right-angle coaxial connector. Supporting 1.2A power draw, this power adapter is Class 2, UL approved.
Alzatex ALZM04B Specs
Wireless
Wireless | 2.4 GHz Radio/RF *Built-In |
Power
Power Source | AC Adapter with Power Brick (Not Included) |
DC Input Power | 12 to 15 VDC |
Operating Current | 100 mA |
Physical
Color | Black |
Material of Construction | ABS Plastic |
Dimensions | Not Specified by Manufacturer |
Weight | 0.5 lb / 227 g |
In the Box
- 2-Year Manufacturer Warranty
- Reference Card
- Wiring Diagram
- 2-Year Manufacturer Warranty
- Wiring Diagram
No posts found