Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Kanto Living PDX680 Full-Motion Wall Mount for 39 to 80 Displays (Black)
EAN: 800152715315
Mount your 39 to 80 display weighing up to 125 lb with the black Kanto PDX680 Full-Motion Wall Mount. It supports displays with 200 x 100 to 700 x 400mm mounting patterns and can extend from the wall up to 24 , or fully retract to provide a 2 profile. It provides -3 to 15° of tilt, up to 170° of swivel, and has adjustable horizontal leveling.
Low-Profile Design
The design of the PDX680 allows your display to sit as close as 2 from the wall when fully retracted.
Enhanced VESA Compatibility
The H-frame mounting bracket accommodates VESA sizes from 200 x 100 to 700 x 400mm. The mounting arms allow you to raise or lower your display depending on its VESA pattern.
Magnetic Lag Bolt Covers
Magnetic covers go over the lag bolts to help give the wall plate an elegant look. Remove the covers when you install or remove the wall plate from the wall.
Extends up to 24 from the Wall
Despite its low-profile design, the PDX680 can extend up to 24 from the wall, allowing you to tilt and swivel your display or extend it from an alcove.
Supports up to 125 lb
The solid steel frame of the PDX680 can hold up to 125 lb, even at full extension.
Swivels up to 170°
The articulating arms of the PDX680 allow for up to 170° of swivel with a 39 display the larger the display, the less swivel the mount will be able to provide.
Tilt Mechanism
The tilt mechanism lets you angle your display up to 15° forward or 3° backward. Once you reach your preferred viewing angle, tighten the nuts to secure your display in place.
Integrated Cable Management
Four cable management raceways are attached to the bottom of the wishbone arms. These are accessed by loosening a screw, twisting them to the side, laying the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides, whichever you prefer.
EAN: 800152715315
Mount your 39 to 80 display weighing up to 125 lb with the black Kanto PDX680 Full-Motion Wall Mount. It supports displays with 200 x 100 to 700 x 400mm mounting patterns and can extend from the wall up to 24 , or fully retract to provide a 2 profile. It provides -3 to 15° of tilt, up to 170° of swivel, and has adjustable horizontal leveling.
Low-Profile Design
The design of the PDX680 allows your display to sit as close as 2 from the wall when fully retracted.
Enhanced VESA Compatibility
The H-frame mounting bracket accommodates VESA sizes from 200 x 100 to 700 x 400mm. The mounting arms allow you to raise or lower your display depending on its VESA pattern.
Magnetic Lag Bolt Covers
Magnetic covers go over the lag bolts to help give the wall plate an elegant look. Remove the covers when you install or remove the wall plate from the wall.
Extends up to 24 from the Wall
Despite its low-profile design, the PDX680 can extend up to 24 from the wall, allowing you to tilt and swivel your display or extend it from an alcove.
Supports up to 125 lb
The solid steel frame of the PDX680 can hold up to 125 lb, even at full extension.
Swivels up to 170°
The articulating arms of the PDX680 allow for up to 170° of swivel with a 39 display the larger the display, the less swivel the mount will be able to provide.
Tilt Mechanism
The tilt mechanism lets you angle your display up to 15° forward or 3° backward. Once you reach your preferred viewing angle, tighten the nuts to secure your display in place.
Integrated Cable Management
Four cable management raceways are attached to the bottom of the wishbone arms. These are accessed by loosening a screw, twisting them to the side, laying the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides, whichever you prefer.
Kanto Living Full Motion Wall Mount Specs
Compatibility
Supported Screen Sizes | 39 to 80" / 99.1 to 203.2 cm |
Weight Capacity | 125 lb / 56.8 kg |
Mounting-Hole Pattern | 200 x 100 mm 200 x 200 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 400 x 400 mm 600 x 200 mm 600 x 400 mm 700 x 400 mm |
In the Box
- Kanto Living PDX680 Full-Motion Wall Mount for 39 to 80" Displays (Black)
- Assembly Hardware
- Mounting Hardware for Wood Studs and Concrete Walls
- 5-Year Manufacturer Warranty
No posts found