Enjoy remote controlled TV height adjustment with the Mount-It! MI-302 Motorized Fireplace TV Mount with In-Wall Recessed Base. The MI-302 allows you to mount your 42 to 80" TV over your fireplace or higher up on the wall, and bring it down to eye level electronically when you're ready to watch.
The in-wall design creates a bespoke look with just 1.65" between wall and screen, when in the fully raised and retracted position. The MI-302 features 24.8" of motorized height adjustment, along with manual tilt, swivel, and leveling options to help you find the perfect viewing angle. With a weight capacity of 110 lb and VESA support from 100 x 100 to 600 x 500mm, this mount is compatible with a wide variety of large format TVs and monitors.
Installation Requirements
The MI-302 recessed box is designed for installation between 16" studs and requires an opening 29" tall, by 14.5" wide, by 3.5" deep. The maximum mantle depth that can be accommodated while still allowing the screen to tilt fully is 14.5"; at 15.75" tilting is no longer possible. This is recommended for decorative fireplaces with a maximum 100° heat development. It is not suitable for mounting above primary heat sources.
Note: The deeper the mantle the higher the mount needs to be installed. Ensure you consider TV size, mantle depth, and ceiling height prior to purchase. Additionally, only TVs with screen size 60" and larger will fully cover the recessed box in the upper position. With TVs smaller than 60" a part of the box can be visible.
EAN: 810041737588
Mount-It! Motorized Fireplace TV Mount Specs
Key Specs
| Supported Screen Sizes | 42 to 80" / 106.7 to 203.2 cm |
| Weight Capacity | 110 lb / 49.9 kg |
| Mounting-Hole Pattern | 100 x 100 to 600 x 500 mm |
| Tilt Adjustment | -5 to +10° |
| Pan Adjustment | No |
| Swivel Adjustment | -30 to +30° |
Compatibility
| Supported Screen Sizes | 42 to 80" / 106.7 to 203.2 cm |
| Weight Capacity | 110 lb / 49.9 kg |
| Mounting-Hole Pattern | 100 x 100 to 600 x 500 mm |
| Number of Displays Supported | 1 |
Adjustments
| Tilt Adjustment | -5 to +10° |
| Tilt Increments | No |
| Pan Adjustment | No |
| Swivel Adjustment | -30 to +30° |
| Vertical Adjustment | 24.8" / 63 cm |
| Rotation Adjustment | No |
| Level Alignment (Micro-Adjustment) | Yes (Roll) Roll -3 to +3° |
| Orientation | Landscape |
General
| Construction Material | Steel |
| Security | Security Screws |
| Certifications | UL |
| Arm Length | 17.71" / 44.98 cm |
| In-Wall/Recessed | Yes, 29 x 14.5 x 3.5" / 73.7 x 36.8 x 8.9 cm |
| Mounting Requirements | Double Stud |
| Stud Distance | 16.0" / 40.6 cm |
| Distance from Mounting Surface | 1.65 to 17.71" / 4.19 to 44.98 cm |
| Wall Plate Size | 15.75 x 30.78" / 40.01 x 78.18 cm |
| Dimensions | 30.78 x 27 x 5.15" / 78.18 x 68.6 x 13.08 cm |
In the Box
- Mount-It! MI-302 Motorized Fireplace TV Mount with In-Wall Recessed Base
- Recessed Box
- Motorized Arm
- 2 x VESA Bracket
- Universal Adapter Plate
- 4 x Security Clip
- Remote Control
- Linear Actuator
- Power Cable
- Mount Template
- Mounting Hardware
- 2-Year Manufacturer Warranty
No posts found
