Apogee Electronics Symphony Mk II Pro Tools HD/Dante Interface with 16x16 SE and 2x6 SE Modules

Apogee Electronics Symphony I/O Mk II Overview

The ultimate music-production centerpiece for any modern commercial, project, or personal studio, the is designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using Pro Tools HD systems and Dante networked audio. The included 16x16 SE and 2x6 SE I/O modules offer stunning dynamic range with low distortion and noise for mastering-grade sonic quality. The system is Dolby-Atmos ready.

This configuration gives you a total of 18 analog inputs on two XLR connectors and two DB-25 connectors, plus 22 analog outputs on three DB-25 connectors. Additional XLR connectors allow for two channels of AES I/O. You also get up to eight channels of ADAT I/O via optical connectors and two channels of S/PDIF I/O via RCA connectors. The chassis utilizes Mini-DigiLink and ethernet-based Dante connectivity for high-speed data transfer rates and compatibility with your Pro Tools HD hardware and Dante network. Its front panel presents a TFT touchscreen display, multifunction control knob, and convenient 1/4" stereo headphone output.

Apogee Electronics Symphony I/O Mk II Pro Tools HD / Dante Interface (No I/O Modules)

The Apogee Electronics Symphony I/O Mk II Pro Tools HD / Dante Interface is an audio interface designed to provide direct connectivity to Dante audio networks and Pro Tools HD systems, for recording and mixing engineers in broadcast, postproduction, studio, and live stage applications. It features primary and secondary Dante ports, a Mini-DigiLink port, BNC loop sync I/O, and BNC word clock I/O. A stereo 1/4" headphone jack enables quick and effective monitoring with a variety of headphone impedances.

Configure and control the chassis via the color touchscreen display and large rotary control on the front panel, or enjoy comprehensive remote control of its settings by using Apogee s Network Control software on your macOS or Windows 10 computer. Install multiple I/O cards (available separately) for up to thirty-two channels of analog inputs and outputs. The Symphony I/O Mk II is made in the USA and ships with a power cable.

Ideal for powerful audio-over-IP applications in post production, broadcast, live sound, or recording studio networks

Uses Audinate s Dante Brooklyn II module, which features two Dante ports and plug-and-play media networking for up to 32 bidirectional channels at 96 kHz or 16 bidirectional channels at up to 192 kHz

Pro Tools HD peripheral port allows Mini-DigiLink connectivity to your Pro Tools HDX, HD Native, or Core/Accel system for up to 32 bidirectional channels at up to 192 kHz (I/O modules available separately)

Works seamlessly with any other Dante-powered devices

High-fidelity DAC and headphone amplifier features Apogee s proprietary Constant Current Drive for robust power and smooth frequency response with any headphones

High-resolution color touchscreen TFT display provides access to essential input and output settings, and shows signal levels, polarity, muting, phantom power, and Soft Limit status

Large front-panel control for quick adjustment of selected parameter

Supports multiple I/O cards (available separately) for up to 32 channels of analog inputs and outputs

Ultra-low latency

BNC loop sync I/O for synchronizing multiple Pro Tools HD audio interfaces

BNC wordclock I/O for synchronizing external equipment

Enhanced temperature controls are complemented by an improved fan and chassis ventilation design, which allows adequate component cooling to occur quietly

Supports standalone mode for setup and operation without a computer use the Symphony I/O Mk II with a hi-fi system or as a dedicated AD-DA converter

Designed in California, made in the USA

EAN: 805676302263

Apogee Electronics 16x16 SE Module Analog Input/Output Module for Symphony I/O Mk II

Audio professionals looking for the very best converters will appreciate the updated Apogee Electronics 16x16 SE Module, a sixteen-channel analog input and sixteen-channel analog output module for the Symphony I/O Mk II. The module occupies one of the two slots available on the chassis. Additionally, two-channel coaxial S/PDIF input and output is also provided. The A/D circuit has been refined to offer a streamlined circuit design, resulting in the most transparent signal path to the A/D stage possible.

The D/A section has been optimized with a more powerful and robust output driver that is capable of driving virtually any input without a decrease in performance, regardless of the load presented by the connected gear. The analog inputs and outputs are offered on DB-25 connectors and require optional breakout cables, available in various configurations to suit individual requirements.

Note:

Requires Symphony I/O Mk II Chassis with available card slot.

Analog-to-digital and digital-to-analog module for the Symphony I/O Mk II system

Sixteen channels of balanced analog input and sixteen channels of balanced analog output

Two channels of coaxial S/PDIF input and output

Ultralow latency conversion

Entire audio path is DC coupled, resulting in ultra-flat frequency response and extremely low phase error

EAN: 805676302850

Apogee Electronics 2x6 SE Special Edition Mastering I/O Card for Symphony I/O Mk II

The Apogee Electronics 2x6 SE is a special-edition mastering I/O card designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers in personal, project, and commercial studios. It features low THD+N (-116 dB for analog inputs, -118 dB for analog outputs) and high dynamic range (124 dBA for analog inputs and 131 dBA for analog outputs) for uncompromising accuracy and detail.

Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The 2x6 SE is easily installed in a Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis.

Note:

Requires Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis with available card slot.

High-performance A/D-D/A conversion designed specifically for mastering engineers

High dynamic range of 124 dBA for analog inputs and 131 dBA for analog outputs

Low THD+N of -116 dB for analog inputs and -118 dB for analog outputs

Two balanced analog line-level inputs via XLR 3-pin connectors

Six channels of balanced analog line-level outputs via DB25 connector

AES/EBU stereo digital I/O via XLR 3-pin jacks

S/PDIF stereo digital I/O via RCA coaxial jacks

ADAT, SMUX, or S/PDIF digital I/O via TOSLINK optical ports

Supports 44.1 to 192 kHz sample rates

Compatible with Apogee Symphony I/O Mk II Thunderbolt and Pro Tools HD chassis

EAN: 805676302102