Apogee Electronics Symphony Mk II Pro Tools HD Interface with 16x16 SE and 2x6 SE Modules

Apogee Electronics Symphony I/O Mk II Overview

The ultimate music-production centerpiece for any modern commercial, project, or personal studio, the Apogee Electronics Symphony Mk II Pro Tools HD Interface with 16x16 SE and 2x6 SE Modules is designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using Pro Tools HD systems. The included 16x16 SE and 2x6 SE I/O modules offer stunning dynamic range with low distortion and noise for mastering-grade sonic quality. The system is Dolby-Atmos ready.

This configuration gives you a total of 18 analog inputs on two XLR connectors and two DB-25 connectors, plus 22 analog outputs on three DB-25 connectors. Additional XLR connectors allow for two channels of AES I/O. You also get up to eight channels of ADAT I/O via optical connectors and two channels of S/PDIF I/O via RCA connectors. The chassis utilizes Mini-DigiLink connectivity for high-speed data transfer rates and compatibility with your Pro Tools HD hardware. Its front panel presents a TFT touchscreen display, multifunction control knob, and convenient 1/4" stereo headphone output.

Apogee Electronics Symphony I/O MkII Pro Tools HD Chassis (No I/O Modules)

The Apogee Electronics Symphony I/O Mk II Pro Tools Chassis is an audio interface chassis designed to provide direct connectivity to Pro Tools HD systems for recording and mixing engineers in broadcast, postproduction, studio, and live stage applications. It features a Mini-DigiLink port in the pre-installed HD option card, BNC loop sync I/O, and BNC word clock I/O. A stereo 1/4" headphone jack enables quick and effective monitoring with a variety of headphone impedances.

Emulating an Avid HD I/O interface, it ensures seamless integration and sample-accurate delay compensation while delivering ultralow latency for proper timing in signal conversion. Configure and control the chassis via the color touchscreen display and large rotary control on the front panel. Install multiple I/O cards (available separately) for up to 32 channels of analog inputs and outputs.

The Symphony I/O MkII is made in the USA and ships with a power cable.

Pre-installed HD option card allows Mini-DigiLink connectivity to your Pro Tools HDX, HD Native, or Core/Accel system

Emulates Avid HD I/O

Ultralow latency performance

Sample-accurate delay compensation

Stereo 1/4" headphone jack features Apogee s proprietary Constant Current Drive for smooth frequency response with any headphones

Color touchscreen display

Large, front-panel control for quick adjustment of selected parameter

Supports multiple I/O cards for up to 32 channels of analog inputs and outputs

BNC loop sync I/O for synchronizing multiple Pro Tools HD audio interfaces

BNC word clock I/O for synchronizing external equipment

Designed in California, made in the USA

Apogee Electronics 16x16 SE Module Analog Input/Output Module for Symphony I/O Mk II

Audio professionals looking for the very best converters will appreciate the updated Apogee Electronics 16x16 SE Module, a sixteen-channel analog input and sixteen-channel analog output module for the Symphony I/O Mk II. The module occupies one of the two slots available on the chassis. Additionally, two-channel coaxial S/PDIF input and output is also provided. The A/D circuit has been refined to offer a streamlined circuit design, resulting in the most transparent signal path to the A/D stage possible.

The D/A section has been optimized with a more powerful and robust output driver that is capable of driving virtually any input without a decrease in performance, regardless of the load presented by the connected gear. The analog inputs and outputs are offered on DB-25 connectors and require optional breakout cables, available in various configurations to suit individual requirements.

Note:

Requires Symphony I/O Mk II Chassis with available card slot.

Analog-to-digital and digital-to-analog module for the Symphony I/O Mk II system

Sixteen channels of balanced analog input and sixteen channels of balanced analog output

Two channels of coaxial S/PDIF input and output

Ultralow latency conversion

Entire audio path is DC coupled, resulting in ultra-flat frequency response and extremely low phase error

EAN: 805676302850

Apogee Electronics 2x6 SE Special Edition Mastering I/O Card for Symphony I/O Mk II

The Apogee Electronics 2x6 SE is a special-edition mastering I/O card designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers in personal, project, and commercial studios. It features low THD+N (-116 dB for analog inputs, -118 dB for analog outputs) and high dynamic range (124 dBA for analog inputs and 131 dBA for analog outputs) for uncompromising accuracy and detail.

Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The 2x6 SE is easily installed in a Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis.

Note:

Requires Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis with available card slot.

High-performance A/D-D/A conversion designed specifically for mastering engineers

High dynamic range of 124 dBA for analog inputs and 131 dBA for analog outputs

Low THD+N of -116 dB for analog inputs and -118 dB for analog outputs

Two balanced analog line-level inputs via XLR 3-pin connectors

Six channels of balanced analog line-level outputs via DB25 connector

AES/EBU stereo digital I/O via XLR 3-pin jacks

S/PDIF stereo digital I/O via RCA coaxial jacks

ADAT, SMUX, or S/PDIF digital I/O via TOSLINK optical ports

Supports 44.1 to 192 kHz sample rates

Compatible with Apogee Symphony I/O Mk II Thunderbolt and Pro Tools HD chassis

EAN: 805676302102