Apogee Electronics Symphony Mk II Thunderbolt + Pro Tools HD Plus Interface with 2x6 SE Module

Apogee Electronics Symphony I/O Mk II Overview

The ultimate music-production centerpiece for any modern commercial, project, or personal studio, the Apogee Electronics Symphony Mk II Thunderbolt + Pro Tools HD Plus Interface with 2x6 SE Module is designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using a thunderbolt system. The included 2x6 SE I/O module offers stunning dynamic range with low distortion and noise for mastering-grade sonic quality. The system is Dolby-Atmos ready.

This configuration gives you a total of 2 analog inputs on two XLR connectors plus 6 analog outputs on a DB25 connector. You also get two channels of AES I/O on two XLR connectors and ADAT, SMUX, or S/PDIF digital I/O via TOSLINK optical ports. The chassis utilizes USB-C (Thunderbolt) connectivity for high-speed data transfer rates and compatibility with your computer, and DigiLink connectivity to your Pro Tools HD hardware. Its front panel presents a TFT touchscreen display, multifunction control knob, and convenient 1/4" stereo headphone output.

Apogee Electronics Symphony I/O Mk II Chassis (Thunderbolt)

The Symphony I/O Mk II from Apogee Electronics is an advanced, flexible multi-channel audio interface featuring the newest flagship AD/DA conversion, modular I/O (up to 32 inputs and outputs), and an intuitive touchscreen display. The chassis provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O Mk II. The front-panel touch screen offers convenient access to nearly every setting including sample rate, clock source, headphone & speaker output levels, meters for all I/O and section navigation, as well as input levels, digital I/O, and configuration settings.

The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output, while the two Thunderbolt connectors ensure compatibility with newer Mac computers. Also included are Wordclock I/O connectors & termination, an option card slot, and a quiet digitally-controlled fan to keep everything running cool.

The Symphony I/O Mk II features a single ultra-high-fidelity DAC and headphone amplifier with Apogee s Constant Current Drive technology, which was first introduced in the Apogee Groove. The headphone amplifier dynamically compensates for non-linearities of any connected headphones, providing massive power while maintaining extremely low distortion and linear frequency response.

The optional five I/O Modules allow the user to choose from standard configurations, or customize the following channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card), and digital I/O.

Note:

Note! This is the Symphony I/O chassis only.

• Legendary AD/DA conversion
• Up to 32 channels of modular analog I/O with optional 8 mic preamps
• Ultra-low latency performance
• Intuitive touchscreen display and front panel control
• Option card slot for future platform flexibility
• Dynamic Temperature Control
• Designed in California, built in the U.S.A.
  

EAN: 805676301525

Apogee Electronics Symphony I/O MK II Pro Tools HD Card

Connect to Pro Tools HD with the Apogee Electronics Symphony I/O MK II Pro Tools Card, an interface option card that connects to your Pro Tools hardware allowing you to share up to 32 bidirectional channels at 96 kHz or 16 bidirectional channels at 192 kHz across postproduction, broadcast, live sound, or recording studio networks.

The system can be configured with a number of custom options ranging from 8-32 analog I/O channels. The Pro Tools card can be upgraded with Audinate s Dante Brooklyn (sold separately), a versatile and full-featured solution that delivers multichannel Dante audio networking to your Pro Tools / Symphony setup. The optional Dante card allows up to 32 channels with Pro Tools and redundant Dante connectivity to be fitted into a single two-space rack device, providing the smallest footprint available with this feature set.

EAN: 805676302898

Apogee Electronics 2x6 SE Special Edition Mastering I/O Card for Symphony I/O Mk II

The Apogee Electronics 2x6 SE is a special-edition mastering I/O card designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers in personal, project, and commercial studios. It features low THD+N (-116 dB for analog inputs, -118 dB for analog outputs) and high dynamic range (124 dBA for analog inputs and 131 dBA for analog outputs) for uncompromising accuracy and detail.

Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The 2x6 SE is easily installed in a Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis.

Note:

Requires Symphony I/O Mk II Thunderbolt or Pro Tools HD chassis with available card slot.

High-performance A/D-D/A conversion designed specifically for mastering engineers

High dynamic range of 124 dBA for analog inputs and 131 dBA for analog outputs

Low THD+N of -116 dB for analog inputs and -118 dB for analog outputs

Two balanced analog line-level inputs via XLR 3-pin connectors

Six channels of balanced analog line-level outputs via DB25 connector

AES/EBU stereo digital I/O via XLR 3-pin jacks

S/PDIF stereo digital I/O via RCA coaxial jacks

ADAT, SMUX, or S/PDIF digital I/O via TOSLINK optical ports

Supports 44.1 to 192 kHz sample rates

Compatible with Apogee Symphony I/O Mk II Thunderbolt and Pro Tools HD chassis

EAN: 805676302102