RME Digiface Dante Overview
The RME Digiface Dante is an audio interface that combines USB 3.0, MADI, and DANTE formats to give you up to 256 channels of digital connectivity. As such, you can route and mix digital audio coming from multiple sources. It does this at low latency and also gives you the TotalMix FX bundle to apply processing to all of your submixes. With various channel configurations, it can operate at sample rates of up to 192 kHz and at resolutions of 24 bits.
On the front of the unit, you ll find four RJ45 Ethernet ports for Dante connections. These ports support both 100 Mb/s and 1 Gb/s, and can be used in Switched or Redundancy modes. You ll also note 2 BNC sockets for MADI I/O or wordclock connections and a 1/4" headphone output. The headphone output can monitor any audio channel and can also supply an analog stereo mix-down connection.
The rear of the Digiface Dante sports a USB connection for USB 3.0 and USB 2.0 at reduced channel counts (64 channels, Dante only). You can also bus-power the unit over USB, though it s recommended that you use the included power supply if you re running all four network connections and the headphone output at once.
Use this device with your Mac or Windows computer over USB, or operate the unit in standalone. In standalone, the Digiface Dante turns into a 64-channel Dante/MADI converter.
To aid you in routing and mixing signals, the Digiface Dante ships with TotalMix FX. Also included is DiGiCheck DSP, utility software that provides tools to test, measure, and analyze digital audio streams. These tools include peak metering, RMS metering, standardized loudness metering, a vector audio scope, bit statistics, a spectral analyzer, and more.
Select Features at a Glance
- All settings can be changed in real-time
- 64 channels Dante (AES67), 64 channels MADI
- 32 channels 24-bit / 96 kHz of record/playback on both Dante and MADI
- 16 channels 24-bit / 192 kHz of record/playback on both Dante and MADI
- Slave and Master clock modes
- MADI, internal, or Dante clock sources
- 4 x Gigabit Ethernet port, 100 Mb/s compatible
- TotalMix 4096 channel mixer with 46-bit internal resolution, for latency-free submixes and ASIO Direct Monitoring
- Analog/Line headphone output, separate output for independent submix
- DIGICheck DSP for metering needs
- Standalone mode with Dante-to-MADI/MADI-to-Dante converter functionality
- USB error analysis, displayed in the Settings dialog
RME Digiface Dante Specs
Key Specs
Channels of I/O | Digital: 128 Input / 128 Output |
Maximum Sampling Rate | 192 kHz / 24-Bit |
Number of Microphone Inputs | No |
Analog Audio I/O | 1x 1/4" TRS Unbalanced Headphone Output |
Digital Audio I/O | 1x BNC Coaxial MADI Input (Word Clock Support) 1x BNC Coaxial MADI Output (Word Clock Support) |
Host Connection | 1x USB-B |
OS Compatibility | Windows 7 or Later macOS 10.11 or Later |
Power Requirements | AC/DC Power Adapter (Included), USB Bus Power |
In the Box
- RME Digiface Dante 256-Channel Dante to MADI Audio Interface with USB
- USB 3.0 Cable (6.0` / 1.8m)
- RME Driver CD
- Switched Power Supply with Lockable Connector
- Power Cord
- 2-Year Manufacturer Warranty
No posts found