Universal Audio Apollo Twin X DUO Heritage Edition Audio Interface Kit with Adam A4V Studio Monitors

I/O for the Studio

• 10x6 audio interface with two Unison-enabled microphone preamps (via XLR-1/4" combo mic/line inputs), providing emulations of classic analog preamps with near-zero latency
• One front-panel, Unison-enabled 1/4" Hi-Z input for direct connection of a guitar, bass, or keyboard
• Stereo 1/4" monitor output and one 1/4" headphone output, each with dedicated level control
• Two additional 1/4" line-level outputs, may be used for alternate monitor outputs
• Add up to eight extra input channels via one TOSLINK optical ADAT port (may alternatively be used for stereo S/PDIF)

Pro-Level Workflow

• Built-in monitor controller with monitor remote functions and mono, mute, dim, and alt monitor controls
• Integrated talkback and cues for easy communication and slate functionality
• Comprehensive front-panel metering and fast, intuitive controls, no menu-diving required

Expandable I/O and DSP

• Cascade up to four Thunderbolt-equipped Apollo interfaces and six UAD-2 Thunderbolt devices for expanded I/O and DSP
• Expand your studio with an Apollo X rackmount unit (available separately), so you can use your Apollo Twin X DUO as a desktop monitor controller with additional I/O and DSP power
• Backward-compatible with Thunderbolt 1 and 2 via a qualified adapter (available separately)

25 Powered Plug-Ins

Includes Realtime Analog Classics plug-in bundle plus 11 additional plug-ins to complete the compressor, EQ, and preamp collections and provide another reverb (plug-ins support VST, RTAS, Audio Units, and AAX 64-bit for compatibility with all major DAWs):

• UA 610-A Tube Preamp and EQ (Vintage)
• UA 610-B Tube Preamp and EQ (Modern)
• Marshall Plexi Classic Guitar Amp
• Ampeg SVT-VR Classic Bass Amp
• UA 1176LN Limiting Amplifier (Legacy)
• UA 1176SE Limiting Amplifier (Legacy)
• UA 1176 Classic Limiter Collection (1176LN Rev E, 1176 Rev A, and 1176AE 40th Anniversary Edition)
• Pultec EQP-1A EQ (Legacy)
• Pultec MEQ-5 EQ (Legacy)
• Pultec Passive EQ Collection (EQP-1A, MEQ-5, and HLF-3C)
• Teletronix LA-2A Leveling Amplifier (Legacy)
• Teletronix LA-2A Classic Leveler Collection (LA-2A Silver, LA-2A Gray, and LA-2)
• Raw Distortion
• Precision Channel Strip (Precision Mix Rack Collection)
• Precision Reflection Engine (Precision Mix Rack Collection)
• Precision Delay Mod (Precision Mix Rack Collection)
• Precision Delay Mod L (Precision Mix Rack Collection)
• Pure Plate Reverb
• RealVerb Pro Custom Room Modeler

Get Legendary UA Sound Natively with UAD Spark

• Apollo Heritage Editions include plug-ins featured in UAD Spark, UA's subscription plug-in collection that runs natively on Mac no UA hardware required
• With UAD Spark, you can expand your plug-in processing power, balancing your DSP load between Apollo and your computer's onboard processing
• Receive the 1176 Classic Limiter Collection, Teletronix LA-2A Classic Leveler Collection, and Pure Plate Reverb
• Current owners of any plug-ins available in UAD Spark will receive the UAD Spark versions for free

Integration with LUNA Recording System for Mac

• Works with all major DAWs including Logic Pro, Ableton Live, Pro Tools, and more
• Apollo Twin X DUO becomes a fully integrated recording system with LUNA, a powerful free recording application for Mac from Universal Audio
• Bolstered by Accelerated Realtime Monitoring, LUNA lets you track and mix using an intuitive single-window workflow with unlimited track counts, full Audio Units plug-in support, and access to a suite of exclusive LUNA Instruments and Extensions such as Studer multitrack tape and Neve Summing

EAN: 819937003110

Xcellon Thunderbolt 3 Cable (3.3', 20 Gb/s)

The Xcellon Thunderbolt 3 Cable is a highly versatile cable capable of transmitting data, video, and power all through a single USB Type-C connector. It supports data transfer rates of up to 20 Gb/s, 100W of power for charging devices and laptops, as well as a 4K 60 Hz display. Furthermore, Thunderbolt 3 has the ability to daisy-chain up to six devices from a single port, so you can minimize cable clutter for a more efficient setup.

EAN: 847628008847

Adam Professional Audio A4V 130W 4" Active 2-Way Nearfield Studio Monitor (Single, Black)

Audio professionals in need of a high-quality nearfield monitor will be impressed with the black Adam Professional Audio A4V, a professional, 4" 2-way studio monitor speaker that delivers rich, spacious, and enveloping sound, well suited for small studio spaces, short listening distances, and immersive multispeaker configurations.

A 110W RMS Class-D amplifier powers the 4" Multilayer Mineral (MLM) woofer, while a 20W Class-AB amplifier drives the X-ART tweeter with HPS waveguide to provide an ultrawide frequency range (52 Hz to 45 kHz). The rotatable High-Frequency Propagation System (HPS) waveguide technology and onboard DSP allow you position the monitor either horizontally or vertically, while fine-tuning the speaker to your precise requirements.

Rotatable HPS Waveguide and X-ART Tweeter

• ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused on the vertical plane. The A Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology, whether you position the speakers horizontally or vertically.
• The A Series HPS Waveguide is made from a new glass-fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides a precise transient response and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed and consistent sound across the product line.

Multilayer Mineral Woofer

A Series woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering, and geometry of each cone is specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low end.

Hybrid Amplification

• The A Series combines the best of both digital and analog worlds. The woofer is driven by a Class-D amplifier that help produce linear performance while reducing distortion. The amplifier was chosen specifically for its power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A Series.
• The tweeter is powered by a Class-AB amplifier, which offer a smooth, natural reproduction of high frequencies. The amplifier is optimized for its working range, resulting in a fine-tuned, properly aligned speaker. To reach this point, ADAM Audio carried out extensive measurements and listening sessions, trialing countless amplifiers and amplifier components.

DSP-Based Electronics

The A Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analog-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio, including new filter types and features, plus alternative voicings.

Room Adaptation

On the back panel of A Series speakers, you will find four bands of room-adaptation e