The UAX220v2 from Digigram is a USB, 2 channel, line digital audio interface that can be used with both USB 1.1 and 2.0 ports (performance will be based on USB 1.1 regardless of type used). The unit can be switched between either a laptop computer for portable use, or plugged into a desktop computer in the studio or broadcast facility, allowing for very flexible use.
The interface is automatically recognized by the host software as soon as it is plugged in, obviating the need for additional drivers installation. The captive cable provides XLR connectors for the inputs and outputs, which can operate balanced or unbalanced. The UAX220v2 is USB bus powered and does not require any external power supply.
2 input, 2 output USB 1.1 audio interface
Switchable zero-latency direct hardware monitoring of the inputs or the outputs
Input monitoring can be switched to mono mode
XLR connectors on captive breakout cable
Stereo headphone output on 1/4 TRS jack with rotary control for volume adjustment
A/D and D/A conversions at up to 24-bits/48kHz resolution
Plug-and-play operation with no additional drivers needed to be installed
Supports DirectSound, Core Audio, ALSA, along with Digigram np SDK through Virtual PCX and third-party ASIO drivers
Digigram UAX220v2 Specs
Form Factor | Desktop |
Channels of I/O | 2 Input / 2 Output |
Maximum Sampling Rate | 48 kHz / 24-Bit |
Number of Microphone Preamps | 2 Preamps |
Built-In Microphone | None |
Expansion Slots | None |
Signal Processing
Pad | None |
High-Pass Filter | None |
Solo/Mute | None |
Connectivity
Analog Audio I/O | 2 x XLR 3-Pin Balanced/Unbalanced Line Input (on Breakout Cable) 2 x XLR 3-Pin Balanced/Unbalanced Line Output (on Breakout Cable) 1 x 1/4" TRS Headphone Output |
Phantom Power | None |
Digital Audio I/O | None |
Host Connection / USB | 1 x USB-A (with Included Cable) |
Host Connection Protocol | USB 1.1 |
USB (Non-Host) | None |
Sync I/O | None |
Network I/O | None |
MIDI I/O | None |
Wireless Connectivity | None |
Performance
Dynamic Range | Inputs: 104 dBA Outputs: 104 dBA |
THD+N | Inputs: < -98 dB Outputs: < -97 dB |
Digital Audio
Sample Rates | 32 / 44.1 kHz |
Sample Rate Conversion | None |
Bit Depths | 24-Bit |
Audio Storage & Playback
Memory Card Slot | None |
Compatibility
OS Compatibility | macOS Windows XP Linux *As of November, 2021: Check with manufacturer for the most up-to-date compatibility |
Included Software | None |
Processor Requirement | Mac: PowerPC G3 PC: Intel Pentium III |
RAM Requirements | 256 MB |
Power
Power Requirements | USB Bus Power |
Packaging Info
Package Weight | 1.65 lb |
Box Dimensions (LxWxH) | 12.7 x 5.7 x 3.9" |
In the Box
- Digigram UAX220v2 - USB 1.1 Audio Interface
- Carrying Case
- 2 Year Manufacturer Warranty
No posts found