EAN: 815301006336
The Focusrite Pro RedNet X2P is an audio interface with two Evolution mic pres, a stereo line output, and a stereo headphone amplifier. You can use it to add two additional channels of I/O to your existing Focusrite Red interface or to add I/O over any Dante audio-over-IP (AoIP) system. Power, audio, and remote control are provided using a single Ethernet cable with Power-over-Ethernet though a standard DC power supply (also provided).
A local input mixer allows monitoring control for people who want to hear their parts louder over the mix. Conversely, a control lockout parameter ensures your settings remain unchanged when used remotely.
On the rear of the interface you ll find two locking, combination XLR-1/4 inputs, as well as two level-controlled XLR outputs that can go up to 24 dBu. On the front of interface, your 1/4 headphone output is powered by an amplifier capable of driving both low- and high-impedance headphones. The Red Evolution mic pres provide clean gain, phantom power, high-pass filtering at 80 Hz, per-channel polarity reversing, and an Air mode that emulates the sound of Focusrite s classic transformer-based mic preamps, giving you a boost at 10 and 20 kHz respectively.
The X2P can capture and reproduce audio at sample rates and resolutions of up to 96 kHz and 24 bits. On the output side, the RedNet X2P provides a dynamic range of 120 dB at line level and 117 dB for the headphones. Built out of aluminum and steel, the unit is quite sturdy and can be mounted directly to a mic stand, which keeps it out of the way yet within reach.
Key Features at a Glance
- Stereo 2x2 audio interface for Dante AoIP networks
- Two Red Evolution mic preamps for mic, line, or instrument level inputs
- Power-over-Ethernet supplied: IEEE 802.3af compliant
- Up to 24-bit, 96 kHz sampling rates
- Robust steel and aluminum chassis
- Local input mix to allow personalized monitoring
- Powerful headphone output, even with high-impedance headphones
- Local control lockout of mic settings, output settings, or both
- Up to 24 dBu line output levels
- Independent level control of headphone and line outputs
- Mute switch for line output
- Mic stand mount
- Kensington security slot
- Integrated network switch allows daisy-chaining of network devices
- Includes Brainworx bx_console Focusrite, a plug-in that faithfully captures the sound, feel, and style of the original Focusrite ISA 110 Equalizer and ISA 130 Dynamics Modules
Focusrite X2P 2x2 Specs
Form Factor | Desktop |
Display | 1 x LCD |
Channels of I/O | 2 Input / 2 Output |
Number of Microphone Preamps | 2 Preamps |
Signal Processing
Gain/Trim Range | Hi-Z Inputs: 0 to 68 dB Mic Inputs: 0 to 68 dB |
Connectivity
Analog Audio I/O | 2 x Combo XLR-1/4" TRS Mic/Line Input 1 x 1/4" TRS Headphone Output 2 x XLR 3-Pin Monitor Output |
Phantom Power | 48 V (Selectable on Individual Inputs) |
Digital Audio I/O | None |
Host Connection / USB | None |
Host Connection Protocol | None |
USB (Non-Host) | None |
Sync I/O | None |
Network I/O | 1 x etherCON/RJ45 Dante 1 x etherCON/RJ45 Dante (PoE) |
MIDI I/O | None |
Performance
Frequency Response | Hi-Z Inputs: 20 Hz to 35 kHz ±0.1 dB Mic, Line Inputs: 20 Hz to 35 kHz ±0.1 dB |
Maximum Input Level | Hi-Z Inputs: +15 dBu (Min Gain) Mic Inputs: +24 dBu (Min Gain) |
Impedance | Hi-Z Inputs: 2 Megohms Mic/Line Inputs: 6.2 Kilohms |
Dynamic Range | Mic/Line Inputs: 120 dBA |
SNR | Hi-Z Inputs: 118 dBA Mic/Line Inputs: 120 dBA |
THD+N | Hi-Z Inputs: < -100 dB / < 0.001% Inputs: < -103 dB / < 0.0007% |
Crosstalk | Headphone Outputs: < -85 dB Inputs: < -72 dB System: < -159 dB |
EIN | Mic/Line Inputs: < -130 dBu A-Weighted |
CMRR | Mic/Line Inputs: -80 dB Line Outputs: -80 dB |
Digital Audio
Sample Rates | 44.1 / 48 / 88.2 / 96 kHz |
Bit Depths | 24-Bit (AD/DA Conversion) |
Power
Power Requirements | AC/DC Power Adapter (Included) |
AC/DC Power Adapter | 12 VDC at 1.2 A (Included) |
Power Consumption | 13.3 W |
Physical
Operating Temperature | 113°F / 45°C |
Dimensions | 5.5 x 4.1 x 1.9" / 140 x 104 x 47.5 mm |
Weight | 2.3 lb / 1.0 kg |
Packaging Info
Package Weight | 4.25 lb |
Box Dimensions (LxWxH) | 15 x 7.9 x 4.85" |
In the Box
- Focusrite RedNet X2P 2x2 Dante Audio Interface with Red Evolution Mic Pres
- Locking DC Power Supply
- Ethernet Cable
- RedNet Control Software
- RedNet PCIe Drivers (Included with RedNet Control Download)
- Audinate Dante Controller (Installed with RedNet Control)
- 3-Year Manufacturer Warranty
No posts found