The Apogee Electronics Connect 8x8 MP is an expansion I/O module offering high-performance A/D and D/A conversion, eight high-gain mic preamps, and eight channels of analog and digital I/O for producers and engineers using Symphony I/O Mk II Thunderbolt or Dante chassis in personal, project, and commercial studios.
By utilizing Apogee s Advanced Stepped Gain Architecture, the Connect 8x8 MP delivers up to 72 dB of gain in 1 dB increments while maintaining ultralow noise, virtually nonexistent distortion, and noiseless gain adjustment.
Its analog I/O includes eight channels of balanced inputs and outputs on DB25 connectors. Additional DB25, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The Connect 8x8 MP is easily installed in a Symphony I/O Mk II Thunderbolt or Dante chassis.
Requires Symphony I/O Mk II Thunderbolt or Dante chassis with available card slot.
Advanced Stepped Gain Architecture
Apogee s Advanced Stepped Gain Architecture introduces a mic preamp circuit that is dynamically optimized at different gain settings to provide superior bandwidth, ultralow noise, and nonexistent distortion across an expansive gain range of 0 to 72 dB. Digitally controlled analog switches shift the gears of the circuit at each gain setting to ensure the best sound and performance.
Transparent Conversion
High-performance A/D-D/A conversion designed for extreme audio clarity and sonic transparency
Flexible I/O
- Eight balanced analog inputs and outputs at up to 192 kHz via DB25 connectors
- Eight microphone preamps with up to 72 dB of gain
- Eight AES/EBU inputs and outputs (192 kHz single-wide compatible) via DB25 connector
- TOSLINK optical inputs and outputs support ADAT, SMUX, and S/PDIF (8x8 ADAT at 44.1 or 48 kHz, 8x8 SMUX at 88.2 or 96 kHz, 2x2 S/PDIF at up to 96 kHz)
- Coaxial input and output for 2x2 S/PDIF at up to 192 kHz
For Symphony I/O Mk II
Compatible with Apogee Symphony I/O Mk II Thunderbolt and Dante chassis
Connect Series Highlights
- Up to 72 dB of gain in 1 dB increments
- Noiseless gain adjustment
- +26 dBu maximum input level
- Improved common mode noise rejection and EMI suppression for optimal performance
- Switchable impedance (2.4 or 10 kilohms) to support passive mic splitting in live sound applications
- Control all mic preamps from Symphony I/O s front panel, the optional Apogee hardware remote control, or in the Apogee control software
- Simplified and optimized signal path with fewer components and higher channel count
- Available in configurations of 8, 16, 24, or 32 flagship mic preamps per unit
Apogee Electronics CONNECT-8X8MP Specs
General
| Compatible Interfaces | Apogee Symphony MkII |
| Analog Audio I/O | 1 x DB-25 25-Pin Balanced Line/8-Channel Input 1 x DB-25 25-Pin Line/8-Channel Output |
| Digital Audio I/O | 1 x TOSLINK Optical ADAT / S/PDIF Input (S/MUX Support) 1 x RCA Coaxial S/PDIF Input 1 x TOSLINK Optical ADAT / S/PDIF Output (S/MUX Support) 1 x RCA Coaxial S/PDIF Output 1 x DB-25 AES3 Input 1 x DB-25 AES3 Output |
| Host Connection / USB | None |
| USB (Non-Host) | None |
| Sync I/O | None |
| Network I/O | None |
| MIDI I/O | None |
Digital Audio
| Sample Rates | 192 kHz |
| Bit Depths | 32-Bit |
In the Box
- Apogee Electronics Connect 8x8 MP Expansion Module with 8x8 Analog/Digital I/O and 8 Mic Preamps for Symphony I/O Mk II
- 2-Year Manufacturer Warranty
No posts found
