Electro-Voice RE320 Broadcast Announcer Microphone Kit

Ideal for broadcast, podcast, or voice-over applications, the Electro-Voice RE320 Broadcast Announcer Microphone Kit includes the RE320 vocal & instrument dynamic microphone, the matte-black Auray SSM-BC10 microphone suspension shockmount, a foam pop filter, a two-section broadcast arm, and an XLR cable.

The spring-articulated boom arm and shockmount with swivel basket help reduce unwanted noise and vibrations while allowing you to precisely position the microphone for optimal voice recording.

Electro-Voice RE320 Variable-D Dynamic Vocal and Instrument Microphone

The RE320 Variable-D Dynamic Vocal and Instrument Microphone from Electro-Voice features a neodymium element, sensitivity, and frequency response well suited to handle the gamut of recording applications.

Electro-Voice s Variable-D tonal response aides in combating the proximity effect as well as create an even tonal response at 180° of the capsule making it suitable for capturing a wide variety of vocal and instrument sources. Its neodymium capsule handles high SPL levels making it great at capturing transient signals from amplifier cabinets, percussion instruments, horns, loud vocals, and more.

In addition, the microphone features a kick drum curve switch, which automatically adjusts for the frequency response of kick drums. The RE320 ships with a hard case.

Two-Position Frequency Response Contour Switch

• Selecting the left-hand switch position engages a curve specifically designed for use on kick drums. With dips and peaks exactly where kick drums need a little EQ attention, the result is an incredibly tight " insta-kick" sound requiring little if any additional EQ when the microphone is properly positioned at the drum.
• Selecting the right-hand switch position engages a flatter, more linear curve designed to be ideal for other instruments (such as guitar amps, bass amps, low toms, percussion, brass and wind instruments etc.) as well as voice (music and speech) in many applications. The response is smooth, natural, and articulate with a minimum of discolored off-axis bleed from surrounding sound sources.

Humbucking Coil Technology

• Utilizing the same humbucking coil technology found in the RE20 and RE27N/D to arrest electro-magnetic field interference introduced from sources close to the microphone, the RE320 produces an ultraquiet signal path free from the hum and buzz found in other dynamic microphones.

Variable-D

• Electro-Voices exclusive solution to the tonal changes associated with the proximity effect found in other directional microphones. Providing balanced and uniform frequency response up to 180° off-axis, the result is always stable and linear tonal performance even when the sound source is moving around the mic.

EAN: 701001084807

Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte)

The black matte SSM-BC10 Microphone Suspension Shockmount from Auray is designed to keep your front-address microphone free from vibrations and noise that can often affect broadcast and voiceover applications. The heavy-duty bands isolate your microphone, eliminating the vibrations that can travel through your mic stand or broadcast arm.

The shockmount is equipped with a standard 5/8" -27 threaded socket and fits most mic stands and broadcast arms. Its locking knob and protective inner ring secure your mic in place while protecting its finish. The swiveling basket allows for precise microphone placement.

Eliminates Noise

The SSM-BC10 prevents unwanted vibrations that can radiate through a mic stand or broadcast arm from disrupting your broadcast or recording.

Swiveling Basket with Tension Knobs

The swiveling basket provides precise microphone positioning. Dual tension knobs maintain the angle of the microphone while still allowing smooth repositioning.

5/8" -27 Thread

The SSM-BC10 features a mic stand adapter with a standard 5/8" -27 thread that is compatible with most mic stands and broadcast arms.

Locking Knob with Inner Ring

The locking knob holds the microphone firmly in place. The inner ring applies uniform pressure to the outside of the microphone and prevents damage to the microphone finish

All-Metal Construction

The SSM-BC10 is a durable studio accessory that is built to last. The all-metal construction assures security and protection for the microphone.

Heavy-Duty Elastic Bands

The heavy-duty elastic bands suspend the microphone in the center of the basket, and prevent shocks and vibrations that can radiate through the mic stand or broadcast arm from reaching the microphone.

Black Matte Finish

Using the SSM-BC10 for on-air broadcast, the black matte finish will not reflect lights into the cameras.

For Front-Address Microphones

The SSM-BC10 fits front-address microphones such as the Electro-Voice RE20 and RE320 and the Heil Sound PR 40.

EAN: 847628585188

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It s ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8" -27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360° , the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

Versatile

Ideal for studios as well as home use

Internal Springs

Internal springs provide smooth, noise-free positioning and clean and sleek profile

Sturdy

Supports microphones up to 5 lb / 2.27kg

Compatibility

The 5/8" -27 standard microphone thread is compatible with most shockmounts and microphone clips

Precision

Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement

XLR Cable

The integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transfer

Extra Height

A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors

Combo Mount

The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws

14" Riser

The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors

EAN: 847628578272

Auray WCF-UB440 Foam Windscreen for Large-Diaphragm Condenser Mics

The A