Antec P10C Overview
Reduce noise and interruptions with the sound dampening design of the Antec P10C Mid-Tower Silent Case. Leveraging internal foam and steel panels, the P10C delivers quiet performance so you can focus on your workload, games, and more.
Designed to support a wide range of configurations, the P10C gives you ample room to support ATX, M-ATX, and M-ITX motherboards. Seven expansion slots support multiple utility cards and graphics cards up to 15.9" in length. House and connect an array of storage drives with three 2.5" drive bays and a combo bay that holds up to three 3.5" or two 2.5" drives. A single 5.25" bay is available behind the front ventilation panel, allowing you to install the media drive of your choice. Top I/O panel gives you instant access to various ports including two USB-A and one USB-C port that operate on the USB 3.2 Gen 1 standard and two dedicated 3.5mm jacks for audio-in and -out capabilities. Four 120mm fans are pre-installed in the P10C which enhances airflow while also reducing noise, even at full speed.
Silent Design
Using interior foam padding, steel, and four Antec 120mm Silent Fans, the P10C delivers quiet performance without compromising performance. The front panel uses an air-concentrating filter that enhances airflow to improve thermal performance with a widened air passage to enhance breathability.
Connectivity
The top I/O panel gives you instant access to various ports and connectors to help enhance utility. Two USB-A and one USB-C ports both operate on the USB 3.2 Gen 1 interface, giving you up to 5 Gb/s data transfer speeds and support for resource-demanding devices. Dedicated 3.5mm jacks are reserved for headphones and mics. Included dust plugs prevent dirt and debris from entering the ports when unpopulated, ensuring proper operation when you do need them. A dedicated fan speed control button works in conjunction with the interior hub to switch between high and low fan modes.
Front Access
A reversable swing-open front panel design enables you to quickly access the 5.25" drive bay and uses a magnetic closure to prevent swinging.
Easy to Clean
Front and rear dust filters are easy to access and easy to clean, keeping your internal components free from dust and debris.
Cable Management
Dedicated cable management space makes it easier for you to route cables through the chassis of the P10C.
Cooling Support
You can install a wide range of fans with configurations that can include three 120mm or two 140mm fans at the front, two 120mm fans above the PSU shroud, and one 120mm fan at the rear of the case. The front panel can also house up to a 360mm AiO radiator and the rear can house a single 120mm radiator.
EAN: 761345801027
Antec P10C Specs
Key Specs
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
Internal Drive Bays | 3x 2.5" and 3x 3.5" or 2x 2.5" |
Expansion Slots | 7x Full Height |
Maximum GPU Length | 15.9" / 405 mm |
CPU Cooler Height | 6.9" / 175 mm |
Fans Included | Front: 3x 120 mm Non-LED (Unspecified rpm) Rear: 1x 120 mm Non-LED (Unspecified rpm) |
I/O | 2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1x USB-C (USB 3.0 / 3.1/3.2 Gen 1) |
Windowed Panel | No |
Built-In Lighting | No |
Compatibility
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
External Drive Bays | 1x 5.25" |
Internal Drive Bays | 3x 2.5" and 3x 3.5" or 2x 2.5" |
Expansion Slots | 7x Full Height |
Maximum GPU Length | 15.9" / 405 mm |
CPU Cooler Height | 6.9" / 175 mm |
Supported PSU Size | ATX |
Maximum PSU Length | 8.1" / 205 mm |
PSU Mounting Location | Bottom |
Cooling
Fan Mounting | Front 3x 120 mm or 2x 140 mm Rear 1x 120 mm Internal 2x 120 mm |
Fans Included | Front: 3x 120 mm Non-LED (Unspecified rpm) Rear: 1x 120 mm Non-LED (Unspecified rpm) |
Maximum Radiator Size | Front: 360 mm Rear: 120 mm |
Filter Locations | Bottom, Front |
Inputs / Outputs
I/O | 2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1x USB-C (USB 3.0 / 3.1/3.2 Gen 1) |
Media/Memory Card Slot | No |
Audio I/O | 1x 3.5 mm Input 1x 3.5 mm Output |
Display Outputs | No |
Physical
Windowed Panel | No |
Color | Black |
Material | Plastic, Steel |
Built-In Lighting | No |
Cable Management Space | Yes |
Dimensions (W x H x D) | 8.7 x 19.1 x 18.8" / 220 x 486 x 477 mm |
Weight | 17 lb / 7.7 kg |
In the Box
- Antec P10C Mid-Tower Silent Case (Black)
- 2-Year Manufacturer Warranty
No posts found