Fractal Design Core 1100 Mini-Tower Case (Black)

As another reviewer already stated, the MB space is really cramped. Mounted a 9.6 board, but it is extremely difficult to get it into place, due to the edge of the 5.25 bay lower box. (They have a notch cut out there, but it doesn't go high enough. Used a pliers to bend over enough of the edge to more easily fit the board. Lots of case vendors are doing this now, but painted MB screws? Is the paint conductive? These had such small heads that it barely contacted the solder bumps around the holes on the board. The HDD mounting area is cumbersome at best. The drives must be mounted backwards, with the cable connections toward the front edge of the case. Then the wires go down in front of the fan, which is in the way to mount the drives the other direction. It's a nice looking Black case with top-mount PSU. Two USB ports on the front, but why not forget the USB 2.0 port, and install two USB 3.0 ports? (The USB 3.0 cable takes up the space of BOTH ports on the MB header, making it impossible to use the other one. The USB 2.0 cable does the same, but in that case a person could insert the wires from an additional port into the 4x2+1 header cable housing.)