Turn your PC into the centerpiece of your game room with the HYTE Y60 Mid-Tower Case. Designed to show off your components with a wrap-around tempered glass panel, you can admire your hard work from the comfort of your gaming chair. Full 360° access and flexible design enables builders to install a wide range of components with ease.
Motherboard & Expansion Support
The mid-tower form factor supports a wide range of motherboard sizes including ATX, M-ATX, M-ITX, and even E-ATX. Six standard half-height horizontal expansion slots are available for smaller utility cards while three full-height vertical slots allow you to install and show off graphics cards up to 14.7" long. A PCIe 4.0 x16 riser card is included with the Y60 so you can conveniently get your build together without hunting for another component.
Storage Solution
The Y60 can hold up to two 3.5" HDDs or four 2.5" SSDs, allowing you to easily expand your storage depending on the scale of your digital library. Dedicated housing chambers assist in organizing your SATA and power cables for a neat and clean look.
Cooling Capabilities
Designed to embrace airflow, you can outfit the Y60 with liquid-cooling radiators or traditional high-speed fans. Fans can be installed on the top, rear, and bottom sections of the case while radiators are supported on the side, top, and rear panels. You can also install CPU coolers up to 6.2" high, giving you plenty of options for keeping your case nice and cool. Dust filters are conveniently located on the bottom, side, and top sections, preventing your fans from sucking in dust and clogging up your case.
Connectivity
Connect your peripherals to your PC with the I/O ports neatly fashioned on the bottom beveled edge of the Y60. Easily plug in your controllers and headsets with two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and a single 3.5mm combo audio jack.
Cable Management Space
Easily route your cables through the case with a dedicated cable management space. Grommets assist in channeling your cables while tie-down points enable you to fix cables in place. GPU power connectors can be sent through the bottom section of the case for a fresh, minimalistic look.
HYTE Y60 Specs
Compatibility
| Motherboard Support | ATX, E-ATX, Micro-ATX, Mini-ITX |
| External Drive Bays | None |
| Internal Drive Bays | 2 x 3.5" or 4 x 2.5" |
| Expansion Slots | 6 x Low-Profile + 3 |
| Maximum GPU Length | 14.8" / 375 mm |
| CPU Cooler Height | 6.3" / 160 mm |
| Supported PSU Size | ATX |
| Maximum PSU Length | 9.3" / 235 mm |
| PSU Mounting Location | Bottom |
Cooling
| Fan Mounting (Rear) | 1 x 120 mm |
| Fan Mounting (Side) | 2 x 120 mm or 2 x 140 mm |
| Fan Mounting (Top) | 3 x 120 mm |
| Fan Mounting (Bottom) | 2 x 120 mm or 2 x 140 mm |
| Fans Included (Front) | None |
| Fans Included (Rear) | 1 x 120 mm (1300 rpm) |
| Fans Included (Side) | None |
| Fans Included (Top) | None |
| Fans Included (Bottom) | 2 x 120 mm (1300 rpm) |
| Maximum Radiator Size (Rear) | 120 mm |
| Maximum Radiator Size (Side) | 280 mm |
| Maximum Radiator Size (Top) | 360 mm |
| Filter Locations | Bottom, Side, Top |
I/O
| I/O | 2 x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1 x USB-C (USB 3.1/3.2 Gen 2) |
| Media/Memory Card Slot | None |
| Audio I/O | 1 x 3.5 mm Input/Output |
| Display Outputs | None |
Physical
| Windowed Panel | Yes |
| Color | White |
| Material | Plastic, Steel, Tempered Glass |
| Built-In Lighting | No |
| Tool-Less Design | Thumbscrews, Screw-Less Drive Bays |
| Cable Management Space | Yes |
| Dimensions (W x H x D) | 11.2 x 18.2 x 18" / 285 x 462 x 456 mm |
Packaging Info
| Package Weight | 25.78 lb |
| Box Dimensions (LxWxH) | 21 x 20.7 x 14.6" |
In the Box
- HYTE Y60 Mid-Tower Case (White)
- PCIe 4.0 x16 Riser Card
- 3-Year Manufacturer Warranty
No posts found
