Lian Li UNI FAN TL LCD 140mm Fan (White)

Lian Li UNI FAN TL LCD 140 Overview

Designed for system cases and optimized for airflow and noise, the white UNI FAN TL LCD 140mm Fan from Lian Li features nine fan blades, a fan speed of 400 to 1600 rpm with Pulse-Width Modulation, and Fluid Dynamic Bearing technology that provides stability, durability, and longevity. It generates only 28.5 dBA of noise, a maximum airflow of 68.1 CFM, and a maximum static pressure of 3.5mm H₂O.

Thanks to a 1.6" IPS display, users will be able to monitor temperature and loading of their CPU and GPU, plus fan speed. Or, upload a personalized MP4, GIF, JPG, or PNG to the display. The fan also has 26 LEDs with a side diffuser on each side of the frame. An infinity mirror on both sides of the frame helps showcase multi-layer lighting effects, or customize individual effects on each side of the LED strips. Included is a UNI FAN controller cable (P-7P) and four screws. Protection is provided by a limited 3-year warranty.

Please note that the controller is not included but is required for use. UNI FAN TL series fans will not function without a controller. Controllers are only included in the 3-pack.

Features

• 1.6" LCD screen with 400 — 400 resolution
• Supports GIF, MP4, JPG, and PNG files
• Suitable as a PC case with airflow and noise optimization
• Comes with Lian Li flow-through animations through L-Connect 3
• FDB bearing that provides stability, durability, and longevity
• Enlarged infinity mirror around the frame with a longer light guide for a unified daisy-chained look
• Features two light zones for increased lighting customizability
• UNIFAN interlocking system for ease of cable management
• LED lighting and fan speed controller shared with UNIFAN TL
• Complete software control with L-Connect 3

Empower with a Customizable Display

• PCIe power cable
• 400 — 400 resolution
• 500 nits typical brightness
• IPS display

Performance Detail at a Glance

Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen.

Note: The more sensors used, the higher the CPU load will be. It is recommended to keep sensor display at a maximum of 3.

Unique Style

Elevate your system s style by uploading your own personalized MP4 / GIF / JPG / PNG.

Next Generation of UNI FAN

Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
A single cable is all you need to connect a group of up to 3 TL LCD fans to the controller, which supports a maximum of 7 TL LCD fans per controller, with a group of 3 on each port (up to 16 TL+TL LCD fans in total). To operate 8 to 12 TL LCD fans, please use 2 controllers simultaneously. Note that L-Connect 3 doesn t support more than 13 TL LCD fans.

Note: The controller cable is only applicable on the pin side of the fan. Do not install it the other way.

Well Adapted for Most Configurations
The interlocking key at the end of TL LCD fans is removable for enhanced compatibility and less interference with other components.

Stable Operation

The UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Rubber Ring
To provide extra support for fan operation.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Shaft and Copper Base
To ensure fan blade stability during operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

Breeze Your System

This fan provides an improved cooling experience with a fan that doesn t compromise on thermal control, all while offering a personalized screen for a touch of individuality. It features an airflow of 68.1 CFM, a static pressure of 3.5mm H₂O, and noise levels of 28.5 dBA.

Customizable Fan Speed

You re able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3. This fan has a speed of 400 to 1600 rpm.

Continuous RGB Lighting

Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Infinity Mirror

Illuminate your setup with the UNI FAN TL s enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Individual Lighting Effects

Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Smooth Appearance

Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

Software

L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

Two Fans, One Controller

UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 7 TL LCD fans.

Fan Group Signal

Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn t support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard s 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.

Note: Do not use a splitter plug directly in for a stable signal.

EAN: 840353045484