EAN: 884102094972
Empower your small build system with the robust functionality of the Cooler Master V1100 SFX Platinum Fully Modular Power Supply. Sporting a reduced SFX form factor, this power supply delivers ample performance for seasoned builders looking to run resource-demanding gaming components.
With an 1100W single +12V rail and ATX 3.0 support, you can ensure your components receive the proper amount of power necessary to operate at optimal 80 PLUS Platinum efficiency. A dedicated 12VHPWR connector delivers up to 600W of power directly to your compatible GPU, simplifying your installation process without compromising performance and utility. A modular cabling design reduces clutter within the PC case, increasing airflow and allowing you to pick and choose which cables you need including the three PCIe 6+2, four peripheral 4-pin, and EPS connectors.
SFX Form Factor
An SFX PSU is the ideal solution for mini-ITX builds and the included bracket makes this unit compatible with both SFX and ATX cases.
Full-Bridge LLC and DC-DC Technology
The non-contact heat dissipation structure can reduce the switching losses of the power supply and improve the overall efficiency.
100% Japanese Capacitors
Implementing the highest quality of Japanese capacitors to increase efficiency and reduce ripple noise.
Cooler Master V1100 SFX Platinum Specs
Connectivity
| Total Connectors | 1 x 24-Pin ATX Motherboard 1 x 4+4-Pin EPS CPU 1 x 8-Pin EPS CPU 8 x 15-Pin SATA 4 x 4-Pin Peripheral / Molex 3 x 6+2-Pin PCIe 1 x 16-Pin PCIe (12VHPWR) |
| Cable Design | Modular |
| PCIe Connector Distances | 15.7" / 400 mm |
| SATA Connector Distances | 3.9" / 100 mm 9.8" / 250 mm 15.7" / 400 mm 21.7" / 550 mm |
| Peripheral Connector Distances | 3.9" / 100 mm 8.7" / 220 mm 13.4" / 340 mm 18.1" / 460 mm |
| ATX Connector Distance | 11.8" / 300 mm |
| EPS Connector Distances | 17.7" / 450 mm |
Electrical
| Total Wattage | 1100 W |
| Number of +12 V Rails | 1 |
| Combined Power for +12 V | 1099.2 W |
| Max Load for +12 V | 91.6 A |
| Combined Power for +3.3/+5 V | 120 W |
| Max Load for +3.3 V | 20 A |
| Max Load for +5 V | 20 A |
| Max Power for +5 Vsb | 15 W |
| Max Load for +5 Vsb | 3 A |
| Max Power for -12 V | 3.6 W |
| Max Load for -12 V | 0.3 A |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 6.5 to 14 A |
General
| Efficiency Rating | 80 PLUS Platinum |
| Active Power Factor Correction | None |
| Efficiency | 92% |
| Hold up Time | 16 ms at 70% Load |
| Power-Good Signal | 100 to 150 ms |
Cooling
| Fan Size | 92 mm |
| Bearing Type | Fluid Dynamic Bearings (FDB) |
Environmental
| Operating Temperature | 32.0 to 122.0°F / 0.0 to 50.0°C |
Physical
| Form Factor | ATX |
| Compliance | SFX 12V v3.42 |
| Protection | Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection, Surge and Inrush Protection, Under-Voltage Protection |
| Certifications | TUV, CE, FCC, BSMI, CCC, EAC, UKCA *as per Manufacturer |
| Mean Time Between Failures (MTBF) | 100,000 Hours |
| Dimensions | 4.9 x 2.5 x 3.9" / 125 x 63.5 x 100 mm |
In the Box
- Cooler Master V1100 SFX Platinum Fully Modular Power Supply
- 10-Year Manufacturer Warranty
No posts found
