Corsair RM1000x SHIFT 80 PLUS Gold Modular Power Supply

Corsair RM1000x SHIFT Overview

Streamline your installation process while also giving your system ample power with the Corsair RM1000x SHIFT 80 PLUS Gold Modular Power Supply. Not only does the SHIFT allow you to pick and choose the cables you need for your equipment, but it also places Corsair's Type 5 Gen 1 micro-fit PSU connectors on the side, working alongside your dedicated cable management spaces for a more organized experience.

Offering up to 1000W and built off the ATX 12V Version 3.0 standard, you are able to deliver ample power to your gaming-focused components with ease while balancing electrical loads. Modular cable design allows you to pick and choose which cables you need or want to use depending on your system's configuration, giving you more breathing room inside the case while reducing cable clutter. Aside from the standard motherboard and CPU cables, you also get an array of PCIe cables giving you a total of seven connectors between three 6+2 connectors on one cable and two 6+2 connectors on two split cables. For NVIDIA 40 series graphics cards, a single dedicated 12VHPWR cable is included that further reduces cable clutter. You also get 16 SATA connections and eight PATA connectors for storage drives and peripherals, respectively.

SHIFT Design

The SHIFT incorporates a unique design that places the traditional PSU-based connectors on the side as opposed to the rear of the unit, giving you a clear view of your connectors and streamlining your installation process when working in cases with side-accessible cable management areas.

80 PLUS Gold Efficiency

The ATX 3.0 standard demands a high level of reliability and power efficiency, meeting the 80 PLUS Gold certification, giving you up to 87% and 90% efficiency at full- and half-loads, respectively.

Cooling Fan

A low-friction, fluid dynamic bearing 140mm fan with Zero RPM mode support ensures your PSU runs cool while staying virtually silent when not under high load.

105° Capacitors

Built with 100% Industrial-grade, 105° C-rated Japanese electrolytic capacitors for unwavering power and reliability.

Case Compatibility

The PSU and cables will fit in any PC case that supports ATX PSU format and is at least 8.3" (210mm) wide. The PSU must also be accessible from the side when mounted in the case.

EAN: 840006653943