Designed for custom PC builds that require immense power, this SeaSonic PRIME 1300W ATX Power Supply boasts an impressively high wattage while maintaining optimal efficiency so you can run your high-end gaming components with ease.
With 1300W, you can power a wide range of components from your motherboard to your GPU while the 80 PLUS Titanium certification ensures optimal efficiency and reduced electrical waste. Full modular design enables you to use only the cables you need for your system, allowing you to save room within your case. Flat design makes routing cables easier, especially when navigating tight quarters. A single 135mm fan with fluid dynamic bearings reduces thermal buildup within the PSU s electrical chamber for long-lasting performance. The PRIME s cooling fan also reduces noise without increasing temperature and with multiple fan modes you can adjust fan settings to your liking with premium hybrid fan controls. Micro Tolerance Load Regulation keeps the output voltage within a tight range to reduce wasted energy while delivering stability and high-end performance for your system.
SeaSonic Electronics PRIME TX-1300 Specs
Connectivity
| Total Connectors | 1 x 20+4-Pin ATX Motherboard 3 x 4-Pin ATX CPU 8 x 6+2-Pin PCIe 10 x 15-Pin SATA 3 x 4-Pin Peripheral / Molex 2 x 16-Pin PCIe (12VHPWR) |
| Cable Design | Modular |
| PCIe Connector Distances | 24" / 610 mm |
| SATA Connector Distances | 37.4" / 950 mm |
| Peripheral Connector Distances | 27.2" / 690 mm |
| ATX Connector Distance | 27.6" / 700 mm |
Electrical
| Total Wattage | 1300 W |
| Number of +12 V Rails | 1 |
| Combined Power for +12 V | 1296 W |
| Max Load for +12 V | 108 A |
| Combined Power for +3.3/+5 V | 125 W |
| Max Load for +3.3 V | 25 A |
| Max Load for +5 V | 25 A |
| Max Power for +5 Vsb | 15 W |
| Max Load for +5 Vsb | 3 A |
| Max Power for -12 V | 6 W |
| Max Load for -12 V | 0.5 A |
| Peak Power | 1300 W |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 5 to 10 A |
General
| Efficiency Rating | 80 PLUS Titanium |
| Active Power Factor Correction | None |
| Efficiency | 90% at 10% Load 92% at 20% Load 94% at 50% Load 90% at 100% Load |
Cooling
| Fan Size | 135 mm |
| Bearing Type | Fluid Dynamic Bearings (FDB) |
| Fan Life Expectancy | 50,000 Hours |
Environmental
| Operating Temperature | 32 to 122°F / 0 to 50°C |
Physical
| Form Factor | ATX |
| Compliance | ATX 12 V |
| Protection | Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection, Under-Voltage Protection |
| Certifications | cTUVus, TUV, CB, CCC, BSMI, EAC, CE, ENERGY STAR, RoHS, WEEE, REACH *as per Manufacturer |
| Mean Time Between Failures (MTBF) | 150,000 Hours |
| Dimensions | 5.9 x 3.4 x 8.3" / 150 x 86 x 210 mm |
Packaging Info
| Package Weight | 13.585 lb |
| Box Dimensions (LxWxH) | 18.5 x 7.8 x 5" |
In the Box
- SeaSonic Electronics PRIME 1300W ATX Power Supply
- Motherboard Cable
- 3 x 4+4 CPU Cable
- 2 x 12VHPWR Cables
- 8 x PCIe Cables
- 4 x 15-Pin SATA Cables
- SATA 3.3V
- Molex Cable
- Power Cable
- PSU & Cable Bag Set
- PSU Tester
- Cable Ties
- Screw Set
- 12-Year Manufacturer Warranty
No posts found
