Turtle OWC ThunderBay 4 RAID Array Waterproof Wheeled Case (Black)

Precision-cut foam lines the inside of the case, securely holding your ThunderBay 4 RAID array while also preventing static charges from affecting your equipment. Dedicated cable cut-outs keep your cables and other materials organized and together. Double movement latches and stainless-steel hardware prevent accidental opening and attributes itself to the case`s MIL-STD-810F IP67 dustproof and waterproof design. You can equip the case with optional locking mechanisms with double padlock loops, keeping unauthorized users from accessing your storage drives. A crushproof design, ATA impact certified, and ASTM testing ensures optimal safety measures against drops, vibrations, environmental rainfall, impacts, and more. An ergonomic handle, integrated wheels, and telescoping handle make it easy to travel through busy security checkpoints and hubs.

Descriptions of Tests

ATA Specification 300 Category 1

Airline transport container suitable for a minimum of 100 airline trips
Impact Resistance Test; samples were exposed to impact using a bar weighing 13.2 lb with a hemispherical end of 1.25`. Bar was dropped with its longitudinal axis vertical on to each sample`s weakest point from a height of 19.6`. Samples were conditioned to a temperature of -4°F before impact exposure.

ASTM D-4169 DC-18 Level 1 Schedule A Handling

A series of drops on each edge, corner, and face of the case from a height of no less than 19` and with loads of 15-70 pounds determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -18 and 140°F for a minimum of 3 hours at each condition.

ASTM D-4169 DC-18 Level 1 Schedule F Loose Load Vibration

The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads.

ASTM D-4169 DC-18 Level 1 Schedule H Environmental Hazard Rainfall

Simulated rainfall for 2 hours at a rate of 4` an hour. Samples were conditioned to -4 and 125°F.

MIL-STD-810F Method 512.4

The case is submerged in a basin of water to a depth of 3.28` to the top most part of the case for 30 minutes. The case is heated to 10°F higher than the temperature of the water. IP67 ingress protection provides total coverage against dust and the effects of immersion between 5.9 and 39.37`.