Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
StarTech 40-Pin PATA to 2.5` SATA HDD/SSD/ODD Converter
EAN: 065030852258
The 40-Pin PATA to 2.5` SATA HDD/SSD/ODD Converter from StarTech enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port. This converter is a cost-effective solution that allows you to add SATA drives and keep your existing motherboard. It bridges the gap between a 2.5`, 3.5`, and 5.25` SATA drive and an older IDE motherboard port. The converter also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
Connects a SATA device to an IDE/ATA motherboard or controller card
Complete hardware solution, no software required
Support for 48-bit Logical Block Addressing (LBA)
Compliant with SATA revision 1.0 specification and compatible with Ultra ATA 133 specification
Supports 2.5`, 3.5`, and 5.25` SATA drives
ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
An internal solution for connecting your SATA hard drive to a motherboard that supports an IDE interface
Suitable for use with older motherboards that do not support SATA
EAN: 065030852258
The 40-Pin PATA to 2.5` SATA HDD/SSD/ODD Converter from StarTech enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port. This converter is a cost-effective solution that allows you to add SATA drives and keep your existing motherboard. It bridges the gap between a 2.5`, 3.5`, and 5.25` SATA drive and an older IDE motherboard port. The converter also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
Connects a SATA device to an IDE/ATA motherboard or controller card
Complete hardware solution, no software required
Support for 48-bit Logical Block Addressing (LBA)
Compliant with SATA revision 1.0 specification and compatible with Ultra ATA 133 specification
Supports 2.5`, 3.5`, and 5.25` SATA drives
ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
An internal solution for connecting your SATA hard drive to a motherboard that supports an IDE interface
Suitable for use with older motherboards that do not support SATA
StarTech IDE2SAT2 Specs
| Connector 1 | IDE (40-pin EIDE/PATA) |
| Connector 2 | SATA data and power combo (7+15-pin) |
| Connector 3 | SP4 (4-pin small drive power) |
| System and Cable Requirements | An IDE controller and ATA cable |
| Data Transfer Rate | Maximum: 133 MB/s |
| Chipset ID | Marvell - 88SA8052 |
| Operating Temperature | 40 to 122°F (5 to 50°C) |
| Storage Temperature | -13 to +176°F (-25 to +80°C) |
| Relative Humidity | 15 to 90% |
| Compliances | CE, FCC, RoHS |
| Dimensions | 3.0 x 0.8 x 0.9" (76.2 x 20.3 x 22.9 mm) |
| Weight | 0.5 oz (14.2 g) |
In the Box
- StarTech 40-Pin PATA to 2.5" SATA HDD/SSD/ODD Converter
- LP4 Molex to SP4 Power Cable
- 2-Year Manufacturer Warranty
No posts found
