Protect up to 7 devices from power surges and spikes with the BE600M1 Back-UPS 600 VA UPS with Battery Backup from APC. This uninterruptible power supply features 7 AC outlets and a USB port to safely provide power to up to 8 devices. Audible alarms indicate changes in power, battery failure, wiring problems, and if a battery was disconnected in order to keep you informed. Additionally, there are LED indicators to quickly inform you of the status of the unit.
General Features
600 VA / 330W power rating
Simulated sine wave UPS with battery
Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in varying environments
Automatic self-test ensures early detection of failing batteries
Battery failure notification provides an early warning of when a battery is dying
Building wiring fault indicator informs users of potentially dangerous wiring
The unit can provide temporary battery power when utility power is lost
Hot-swappable batteries allow for easy battery replacement without losing power
Transformer block spacing provides enough space for larger power adapters
Intelligent battery management ensures efficient battery maintenance
Five battery backup outlets and two surge-only outlets
$75,000 equipment protection policy against damaged connected equipment
EAN: 731304325116
APC BE600M1 Specs
General
| Total Outlets | 7 x NEMA 5-15R |
| Protected Outlets | 5 x NEMA 5-15R (Battery and Surge) 2 x NEMA 5-15R (Surge Only) |
| Plug Type | NEMA 5-15P Right-Angle |
| USB Charging Ports | 1 x USB-A (1.5 A) |
| Communications | USB via Type-B |
| Noise Filtering | 5% |
| Topology | Standby |
| Transfer Time | 6 to 10 ms |
Power
| Surge Energy Rating | 490 Joules |
| Maximum Wattage | 330 W |
| Nominal Input Voltage | 220 VAC |
| Input Voltage Range | 92 to 139 VAC |
| Input Voltage Adjustable Range | 88 to 142 VAC |
| Input Frequency | 50/60 Hz ± 3 Hz (Auto Sensing) |
| Nominal Output Voltage | 220 VAC |
| Load Capacity | 600 VA |
| Circuit Breaker Rating | 15 A |
| Thermal Dissipation | 16 BTU/Hour |
| Waveform | Simulated Sine Wave |
Battery
| Chemistry | Lead-Acid |
| Recharge Time | 10 Hours |
| Replacement Battery | APCRBC154 |
| Hot-Swap Support | Yes |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 0 to 90% |
| Storage Temperature | 5 to 113°F / -15 to 45°C |
| Storage Humidity | 0 to 95% |
| Storage Altitude | 50,000` / 15,000 m |
| Noise Level | 35 dBA |
Physical
| Cable Length | 5` / 1.5 m |
| Rackmount Size | None |
| Dimensions (W x H x D) | 5.5 x 4.1 x 10.8" / 14 x 10.5 x 27.4 cm |
| Weight | 7.7 lb / 3.5 kg |
Packaging Info
| Package Weight | 8.65 lb |
| Box Dimensions (LxWxH) | 14.25 x 7.6 x 6.8" |
In the Box
- APC BE600M1 Back-UPS with Battery Backup
- Lifetime $75,000 Equipment Protection Policy
- 3-Year Manufacturer Warranty
No posts found
