Cut down on your power footprint while ensuring power protection and backup with the Li-Ion Short Depth 500VA, 120V Smart-UPS with SmartConnect. Sporting four NEMA 5-15R outlets, this UPS utilizes a 5-15P power connection and features single USB Type-A and serial RJ45 communication ports. Delivering 400W or 500VA at 120V, this UPS incorporates integrated LED indicators to visually alert you of status changes. Audible alarms can also be used to monitor the status of the power supply, notifying you of changes to UPS and utility power conditions.
Featuring hot-swappable, user-replaceable batteries, this Smart-UPS allows for easy switching when a battery is depleting, ensuring limited downtime. Cold-start capable, it can provide temporary battery power if utility power is lost. Furthermore, half of the receptacles belong to a single switched outlet group, facilitating discrete control over rebooting hung devices, sequenced power cycling, or load shedding. A SmartConnect port allows users to install a management card to remotely control the UPS. This APC Smart-UPS unit also features a short depth and a 1 RU form factor, allowing for easy installation in server racks.
Cold-Start Capable
Provides temporary battery power when the utility power is out.
Lithium-Ion Battery
Lithium-ion batteries provide twice the service life of a typical lead acid battery and are small, light, and environmentally friendly.
Predictive Replace-Battery Date
Dynamically provides the month and year when battery replacement is recommended to aid in long-term maintenance planning.
Short-Depth Rack Compatibility
Compact design fits comfortably in short-depth racks.
Single Switched Outlet Group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.
Temperature-Compensated Battery Charging
Prolongs battery life by regulating charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
Power Conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Automatic Restart
Automatically starts up connected equipment upon the return of utility power.
Intelligent Battery Management
Maximizes battery performance, life, and reliability through intelligent precision charging.
Automatic Self-Test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery Failure Notification
Provides early-warning fault analysis on batteries, enabling timely preventive maintenance.
Predictive Failure Notification
Provides early-warning fault analysis ensuring proactive component replacement.
Hot-Swappable Batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
User-Replaceable Batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair or MTTR.
Resettable Circuit Breakers
Enables a quick recovery from overload events.
Adjustable Voltage-Transfer Points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable Voltage Sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety-Agency Approved
Ensures the product has been tested and approved to work safely with connected service provider equipment and within the specified environment.
Audible Alarms
Provides notification of changing utility power and UPS conditions.
USB Connectivity
Provides management of the UPS via a USB port.
Serial Connectivity
Provides management of the UPS via a serial port.
Network Manageable
Provides remote power management of the UPS over the network.
LED Status Indicators
Quickly understand unit and power status with visual indicators.
Pure Sine Wave Output
Simulates utility power to provide the highest degree of compatibility for active PFC or power factor corrected servers and sensitive electronics.
EAN: 731304344551
APC 500VA Specs
General
| Total Outlets | 4 x NEMA 5-15R |
| Protected Outlets | 4 x NEMA 5-15R (Battery and Surge) |
| Plug Type | NEMA 5-15P |
| USB Charging Ports | None |
| Coax Protection | None |
| Data Line Protection | None |
| Communications | Serial via RJ45 USB via Type-A |
| Noise Filtering | 0.3% |
| Topology | Line Interactive |
| Transfer Time | 6 to 10 ms |
Power
| Surge Energy Rating | 680 Joules |
| Maximum Wattage | 400 W at 220 VAC |
| Nominal Input Voltage | 220 VAC |
| Input Voltage Range | 92 to 139 VAC |
| Input Frequency | 50/60 Hz ± 3 Hz (Auto Sensing) |
| Nominal Output Voltage | 220 VAC |
| Output Frequency | 50/60 Hz ± 3 Hz |
| Load Capacity | 500 VA |
| Waveform | Sine Wave |
Battery
| Battery Capacity | 30 VAh |
| Chemistry | Lithium-Ion |
| User Replaceable | Yes |
| Hot-Swap Support | Yes |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 10 to 90% |
| Storage Temperature | 5 to 113°F / -15 to 45°C |
| Operating Altitude | 0 to 6561` / 0.0 to 1999 m |
| Storage Altitude | 0 to 49,212` / 0.0 to 14,999 m |
| Noise Level | 45 dBA |
| Certifications | CSA, FCC, NOM, UL *as per Manufacturer |
Physical
| Rackmount Size | 1 RU (with Included Hardware) |
| Dimensions (W x H x D) | 17 x 1.7 x 9.1" / 43.2 x 4.3 x 23.1 cm |
| Weight | 9.22 lb / 4.18 kg |
Packaging Info
| Package Weight | 12.635 lb |
| Box Dimensions (LxWxH) | 22.9 x 13.3 x 6.5" |
In the Box
- APC Li-Ion Short Depth 500VA, 120V Smart-UPS with SmartConnect
- Rack Mounting Support Rails
- USB Cable
- 5-Year Warranty
Customer reviews
Recommendation for purchase
