CyberPower PR1000RT2UCN Smart App Sine Wave UPS

CyberPower PR1000RT2UCN Overview

Keep your most essential devices safe from power fluctuations and add a barrier of protection with the CyberPower PR1000RT2UCN Smart App Sine Wave UPS. Running off internal batteries, the PR1000RT2UCN gives you additional runtime so IT professionals can properly shut down their equipment to prevent data loss and potential damage.

A total of eight NEMA 5-15R outlets are available, giving you surge suppression of 2430 Joules and battery backup protections across your devices. Four outlets are dedicated to your critical devices, while four are available for lower-priority equipment. The outlets, along with the connected AC cable have dedicated circuit breakers that allow you to reset your system and prevent power fluctuations from effecting your equipment. Equipped with a sealed lead-acid battery and maximum capacity of 1000 VA and 1000W, the PR1000RT2UCN gives you ample runtime to properly shut down your equipment with up to 7 and 19 minutes of life at full and half loads, respectively. The battery takes as little as three hours to recharge and can be hot swapped, allowing you to change out dead batteries without shutting down your entire system. Thanks to the abundance of connections including RJ45, USB-B, and serial ports, you can leverage various remote management software suites including PowerPanel Business Edition, Cloud, EPO, and more so you can monitor and adjust performance in accordance to your IT department's needs.

Connectivity

Aside from the eight standard NEMA 5-15R outlets, you get other connectors including a serial port, dry contact port, EPO, three RJ45 ports, an EPO port, and a USB-B port, giving you multiple ways to enable remote connectivity so you can manage your system on or off site.

Line-Interactive Topology

The UPS automatically regulates low voltage and over voltages without swapping over to the battery, keeping your devices safe across the board thanks to the internal autotransformer.

Automatic Voltage Regulation

Provides clean, consistent AC power by automatically increasing low voltage without using battery power when incoming utility power experiences minor fluctuations.

Sine Wave Output

Provides power protection to ENERGY STAR 6.0 systems with Active PFC power supplies.

Battery Equalization Technology

Battery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.

Fast Charge Technology

Allows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.

Multifunction LCD Panel

You can easily gain a better viewing angle when the Smart App Sinewave is mounted low. This display rotates 90° when placed in a tower format for horizontal viewing and provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.

Toolless Battery Panel Access

Makes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.

GreenPower UPS Bypass Design

Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

Rack & Tower Installation

Allows for horizontal rack or vertical tower installation.

PowerPanel Business Edition Software

Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available.

Connected Equipment Guarantee

CyberPower will repair or replace properly connected equipment if it is damaged by a power surge up to €400,000.

EAN: 649532935635