CyberPower PR1000RTXL2UC Smart App Sinewave UPS

CyberPower PR1000RTXL2UC Overview

Keep your hardware protected from spikes and outages with the PR1000RTXL2UC Smart App Sinewave UPS from CyberPower, a rack/tower convertible UPS with line-interactive topology, surge protection, battery backup, and sine wave output to eliminate power gaps that can be detected by sensitive equipment and cause unexpected shutdowns. This uninterruptible power supply (UPS) sports eight NEMA 5-15R outlets, all of which provide surge protection and battery backup, while four also serve as critical load outlets. Providing an output of 1000VA/1000W at 50/60 Hz, the PR1000RTXL2UC can be used with 120V inputs. Line-interactive topology, automatic voltage regulation, and power-factor correction all ensure your connected equipment is appropriately powered, while a 2430-Joule surge suppression rating and a 15A circuit breaker prevent damage during a spike.

This UPS offers runtimes measuring 8 minutes at full load, or 20 minutes at half load, while the backup battery has a 3-hour recharge time. The sine wave power output results in low total harmonic distortion and electrical noise for improved line clarity. In addition to an RJ45 port for cloud monitoring, the rear panel also incorporates a USB-B, serial, and EPO ports for communication purposes. Using a BP48VP2U01 extended battery module, which is sold separately, users can provide extra power and extend runtimes to connected devices. The multifunction LCD screen rotates 90° and can be used to monitor battery and power conditions and alerts to potential problems. Use PowerPanel Personal software to control your UPS via a convenient dashboard interface. The PR1000RTXL2UC utilizes a 10' power cable with a NEMA 5-15P plug for flexible deployment.

Typical Applications

• Corporate Servers
• Department Servers
• Network Devices
• Storage Devices
• Telecom Installations
• VoIP Installations

Battery Backup

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Line-Interactive Topology

Exists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.

Automatic Voltage Regulation (AVR)

AVR increases or decreases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.

Sine Wave Output

The UPS generates energy that is identical to, or cleaner than the utility company's power grid. Benefits include low total harmonic distortion, minimal electrical noise, and optimal line clarity.

Battery Equalization Technology

Battery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.

Fast Charge Technology

Allows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.

Rotatable Multifunction LCD Panel

Tilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.

Toolless Battery Panel Access

Makes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.

Extended Battery Modules (EBMs)

Use Fast Charge Technology to quickly restore full backup power to a UPS system. They also extend runtime.

Surge Protection

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

GreenPower UPS Bypass Design

A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

Rack/Tower Versatility

Allows for horizontal rack or vertical tower installation.

RMCARD205 Network Management Card

This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system. Built-in cloud monitoring is included.

PowerPanel Business Software

Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.

ENERGY STAR

This model is an ENERGY STAR certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

Limited Three-Year Warranty

CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.

Connected Equipment Guarantee

CyberPower will repair or replace up to €400,000 of properly connected equipment if it is damaged by a power surge.

EAN: 649532935543