Tripp Lite SMART1500RMXL2UA Overview
Tripp Lite SmartPro 1.5kVA Line Interactive Sine Wave UPS provides a continuous supply of battery power for connected server, network and telecommunications equipment during electrical failures. It also safeguards devices against surges, spikes, lightning, and electrical disturbances. Key to this functionality is an automatic voltage regulation (AVR) system, which maintains line power operation with an input voltage range of 75 to 147. Interfaces are in the form of a NEMA 5-15P (120V 15A) input connector and 8 NEMA 5-15R (120V) connectors.
This UPS readily installs in a standard rack chassis (2U) using the supplied 4-post rackmount hardware. Optional accessories are available for tower (2-9USTAND), two post rack 2POSTRMKITWM & wallmount installations.
This UPS supports remote network accessibility via an SNMP/Web card slot and EPO interface. Local PC communication and control is also possible via the USB and serial ports. A half load runtime of 21 minutes can be expanded by connecting a single BP36V15-2U battery pack or multiple BP36V42-3U battery packs.
Operation is further enhanced by an Emergency Power Off (EPO) interface and by an on-board 3-bank PDU switching which supports load shedding and remote-reboot of connected equipment. LED readouts provide precise information on current battery charge status as well as utility power and voltage regulation status. System reliability is further enhanced by audible alarm and self test functions.
Supports 2U rackmount and upright tower applications
Full time sine wave output offer guaranteed compatibility with all equipment types
Supports a max load of 1500VA for 7.5 minutes and a half load of 750VA for 21 minutes
Expandable runtime with BP36V15-2U (limit 1) or with multiple BP36V42-3U rack/tower external battery packs
Maintains regulated 120V nominal output during brownouts and overvoltages from 75 to 147V
1500VA / 1000 watt power handling capability supports a variety of sensitive electronic loads
Includes 8 UPS supported outlets arranged in 3 individually controllable load banks
Built in USB and DB9 serial ports support remote monitoring of UPS and site power conditions
Built in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Mounting hardware included for 4 post rackmount enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM, compatible with upright tower installation with included hardware
EAN: 037332120403
Tripp Lite SMART1500RMXL2UA Specs
| Output | Output Volt Amp Capacity (VA): 1500 Output kVA capacity (kVA): 1.5 Output Watt Capacity (watts): 1000 Output kW capacity: 1 Output power factor: 0.7 Nominal Output Voltage(s) Supported: 120V Frequency compatibility: 60 Hz Output voltage regulation (line mode): -18%, +8% Output voltage regulation (Battery mode): +/- 5% Built-in UPS output receptacles: 8 5-15R outlet(s) Built-in controllable switched load banks: Three switchable two-outlet 5-15R load banks Output AC waveform (AC mode): Sine wave Output AC waveform (battery mode): Pure Sine wave |
| Input | Rated input current (at maximum load): 10.1A Nominal Input Voltage(s) Supported: 120V AC UPS input connection type: 5-15P UPS Input cord length (ft.): 10 UPS Input cord length (m): 3 Recommended Electrical Service: 15A 120V |
| Battery | Full load runtime (minutes): 7.5 min. (1000w) Half load runtime (minutes): 21 min. (500w) DC system voltage (VDC): 36 Battery recharge rate (included batteries): Less than 4.5 hours from 10 to 90% Replacement battery cartridge (internal UPS battery replacement): RBC93-2U Battery Access: Front panel battery access door Battery replacement description: Hot-swappable, replaceable batteries Expandable battery runtime: Extended runtime supported via optional external battery packs External battery pack compatibility: BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible) |
| Voltage | Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147 Overvoltage correction: Input voltages between 128 and 147 are reduced by 12%) Undervoltage correction: Input voltages between 95 and 104 are boosted by 12% Severe undervoltage correction: Input voltages between 75 and 94 are boosted by 24% |
| Switches | LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status Alarms: Audible alarm indicates power-failure, overload and low-battery conditions Alarm cancel operation: Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation |
| Surge & Spike Protection | UPS AC suppression joule rating: 480 UPS AC suppression response time: Instantaneous EMI / RFI AC noise suppression: Yes |
| Rack Mount | Installation form factors supported with included accessories: 4 post 19" rackmount (mounting rail kit included) Installation form factors supported with optional accessories: 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND) |
| Material | Steel |
| Cooling | Fan |
| Environmental | Operating Temperature Range: 32 to 104F (0 to 40C) Storage Temperature Range: 5 to 122F (-15 to +50C) Relative Humidity: 0 to 95%, non-condensing AC mode BTU / hr. (full load): 34.3 Battery mode BTU / hr. (full load): 463.6 |
| Communications | Communications interface: USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface Network monitoring port description: Supports detailed monitoring of UPS and site power conditions PowerAlert software: Included Communications cable: USB and DB9 cabling included WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications |
| Other | Transfer time: 2-4 milliseconds Low voltage transfer to battery power (setpoint): 75 High voltage transfer to battery power (setpoint): 147 Cold Start (startup in battery mode during a power failure): Cold-start operation supported High availability UPS features: Hot swappable batteries Green & high efficiency features: Greater than 95% efficiency - GREEN UPS; Individually controllable load banks Grounding lug: Back panel grounding lug |
| Certification | Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) |
| Integrate Speakers & Output | $250,000 Ultimate Lifetime Insurance |
| Dimensions | 3.5 x 17.5 x 13.5 (8.9 x 44.4 x 34.3cm) |
| Weight | 43.5 lbs (19.7kg) |
In the Box
- Tripp Lite SmartPro 1.5kVA Line Interactive Sine Wave UPS
- PowerAlert Software CD-ROM
- USB and DB9 Cabling
- 4 Post Rackmount Installation Accessories
- Cable for Emergency Power Off interface
- Owner`s Manual and Warranty Information
- 2-Year Warranty
No posts found
