EAN: 810234030335
Elevate your creative process and streamline your productivity with the LulzBot TAZ Dual Extruder v3.1 Tool Head. Seasoned developers can easily use multiple filaments at the same time, speeding up the printing process while also expanding general utility.
Designed for specific LulzBot 3D printers, the Tool Head easily installs and does not require nozzle leveling or offset calibration for seamless retrofitting. Dual 0.5mm nozzles work with the Tool Head s hassle-free hardware and integrated software, enabling you to use a wide range of materials including water-soluble filaments which dissolve for a smoother and cleaner finish. Two 24v 40mm axial fans improve airflow at the extruders while one 5v 40mm axial fan provides enhanced heatsink cooling, preventing overheating and material warping. You can use the Tool Head on the LulzBot TAZ 3D Printer v5.0 and v6.0 models.
General Features
The popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing. The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.
The Dual Extruder v3.1 features a unibody heatsink and redesigned fan mount with two hot ends co-developed with E3D, makers of the ever-popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing.
The Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology.
LulzBot KT-CP0162 Specs
General
| Compatibility | LulzBot TAZ 3D Printer v6.0 LulzBot TAZ 3D Printer v5.0 |
Physical
| Dimensions | Not Specified by Manufacturer |
| Weight | 2.11 lb / 957 g |
Packaging Info
| Package Weight | 3.76 lb |
| Box Dimensions (LxWxH) | 9.3 x 8.8 x 8.4" |
In the Box
- LulzBot TAZ Dual Extruder V3.1 Tool Head
- 3D Printed Z-Axis Endstop Extension Mount (for the TAZ 6)
- Machined Z-Axis Endstop Extension (for the TAZ 6)
- Dual V3 Wiper Mount (for the TAZ 6)
- Additional Spool Arm
- Feed Tube Spinner
- T-NutHholder Jig
- Idler Jig
- 4 x Wire Tie
- Extruder Wiring Harness for Second Extruder
- M5 Washer (Black)
- M5 x 14mm Socket Head Cap Screw (for the TAZ 5)
- Filament Feed Tube
No posts found
