Polymaker 2.85mm PETG-ESD Filament (500g, Black)

Polymaker PB03002 Overview

The Polymaker 2.85mm PETG-ESD Filament pairs electrostatic dissipation (ESD) with PETG with improved toughness. PETG-ESD is compounded with carbon nanotubes that allow it to dissipate electrostatic charges, thanks to its low surface resistivity. This innate property offers protection to delicate electronics during the electronic assembly processes or when printing electronical housings.

Printing Settings

• Printing Temperature: 482 - 554° F / 250 - 290° C
• Bed Temperature: 158 - 176° F / 70 - 80° C
• Printing Speed: 30 - 50 mm/s
• Fan: 20%

• Direct Drive
• Retraction Distance: 1 mm
• Retraction Speed: 20 mm/s

• Indirect Drive
• Retraction Distance: 3 mm
• Retraction Speed: 40 mm/s

Drying Settings

149° F / 65° C for 6 hours
(Only if the material has absorbed moisture)