Polymaker PC-FR 2.85mm Overview
Polymaker PolyMax PC-FR, from Covestro s Makrolon family, is able to achieve V0 performance in the UL94 flame retardancy test, and it displays excellent toughness, strength, and heat resistance. Among other applications, this filament is suitable for the automotive, railway, and aerospace industries. Part of the PolyMax family of 3D printing filaments, PolyMax PC-FR is produced with Polymaker s Nano-reinforcement technology to deliver exceptional mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.
PolyMax PC-FR is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.
Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.4 printer.
Print Settings
Nozzle Temperature
482 to 518° F
Printing Speed
30 to 50mm/s
Bed Temperature
194 to 221° F
Chamber Temperature
194 to 212° F
Bed Surface
Almost any surface with a thin coat of Magigoo PC
Cooling Fan
Off
Mechanical Properties
Young s Modulus
2634 ± 182 MPa
Tensile Strength
67 ± 4.5 MPa
Bending Strength
96.6 ± 1.3 MPa
Charpy Impact Strength
11.7 ± 1.3 kJ/m2
Thermal Properties
Vicat Softening Temperature
240.8° F
Other
Drying Settings
167° F for six hours
Recommended Support Materials
PolyDissolve S2
In the Box
- Polymaker PolyMax PC-FR 3D Printing Filament 2.2 lb (2.85mm Diameter, White)
No posts found
