Polymaker PolyMide CoPA 3D Printing Filament 1.65 lb (2.85mm Diameter, Black)
PolyMide CoPA from Polymaker is based on a copolymer of Nylon 6 and Nylon 66. From the PolyMide family of Nylon/polyamide based filaments, PolyMide CoPA combines excellent strength, toughness, and heat resistance up to 356° F. PolyMide CoPA features Polymaker s Warp-Free technology, which allows the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
PolyMide CoPA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.
Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.
Print Settings
Nozzle Temperature
482 to 518° F
Printing Speed
30 to 60mm/s
Bed Temperature
77 to 122° F
Bed Surface
Glass with glue
Cooling Fan
Mechanical Properties
Young s Modulus
2223 A± 199 MPa
Tensile Strength
66.2 A± 0.9 MPa
Bending Strength
97.0 A± 1.1 MPa
Charpy Impact Strength
Thermal Properties
Glass Transition Temperature
152.6° F
Vicat Softening Temperature
356° F
Melting Temperature
Other
Drying Settings
212° F for eight hours
Recommended Support Materials
PolyDissolve S1
PolyMide CoPA from Polymaker is based on a copolymer of Nylon 6 and Nylon 66. From the PolyMide family of Nylon/polyamide based filaments, PolyMide CoPA combines excellent strength, toughness, and heat resistance up to 356° F. PolyMide CoPA features Polymaker s Warp-Free technology, which allows the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
PolyMide CoPA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.
Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.
Print Settings
Nozzle Temperature
482 to 518° F
Printing Speed
30 to 60mm/s
Bed Temperature
77 to 122° F
Bed Surface
Glass with glue
Cooling Fan
Mechanical Properties
Young s Modulus
2223 A± 199 MPa
Tensile Strength
66.2 A± 0.9 MPa
Bending Strength
97.0 A± 1.1 MPa
Charpy Impact Strength
Thermal Properties
Glass Transition Temperature
152.6° F
Vicat Softening Temperature
356° F
Melting Temperature
Other
Drying Settings
212° F for eight hours
Recommended Support Materials
PolyDissolve S1
No posts found
