Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Polymaker PolyMide PA6-GF 3D Printing Filament 4.4 lb (2.85mm Diameter, Gray)
PolyMide PA6-GF from Polymaker is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing layer adhesion. PolyMide PA6-GF is from the PolyMide family of Nylon/polyamide based filaments and features Polymaker s Warp-Free technology, which allows the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
PolyMide PA6-GF is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.
Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.4.0 printer.
Print Settings
Nozzle Temperature
536 to 572° F
Printing Speed
30 to 60mm/s
Bed Temperature
77 to 122° F
Bed Surface
Almost any surface with a thin coat of PVA glue or Magigoo PA
Cooling Fan
Mechanical Properties
Young s Modulus
4431 A± 184 MPa
Tensile Strength
84.5 A± 2.1 MPa
Bending Strength
136.4 A± 1.6 MPa
Charpy Impact Strength
Thermal Properties
Heat Deflection Temperature
ISO 75 1.8 MPa: 314.6° F / ISO 75 0.45 MPa: 375.8° F
Melting Temperature
Other
Drying Settings
212° F for eight hours
Recommended Support Materials
PolyDissolve S1
Annealing
176° F for six hours
PolyMide PA6-GF from Polymaker is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing layer adhesion. PolyMide PA6-GF is from the PolyMide family of Nylon/polyamide based filaments and features Polymaker s Warp-Free technology, which allows the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
PolyMide PA6-GF is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.
Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.4.0 printer.
Print Settings
Nozzle Temperature
536 to 572° F
Printing Speed
30 to 60mm/s
Bed Temperature
77 to 122° F
Bed Surface
Almost any surface with a thin coat of PVA glue or Magigoo PA
Cooling Fan
Mechanical Properties
Young s Modulus
4431 A± 184 MPa
Tensile Strength
84.5 A± 2.1 MPa
Bending Strength
136.4 A± 1.6 MPa
Charpy Impact Strength
Thermal Properties
Heat Deflection Temperature
ISO 75 1.8 MPa: 314.6° F / ISO 75 0.45 MPa: 375.8° F
Melting Temperature
Other
Drying Settings
212° F for eight hours
Recommended Support Materials
PolyDissolve S1
Annealing
176° F for six hours
No posts found
