Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Evolis Lamination Module for Primacy ID Card Printers
Laminate your ID cards for additional durability and protection against fraud with this Lamination Module from Evolis. This module is an accessory for the Primacy ID badge printer, featuring infrared connectors that communicate with the printer for seamless production of any CR-80 sized card with a thickness between 30 and 40 mil. It can laminate one of the sides of the card in a single pass, or both sides by flipping the card over.
Laminate your ID cards for additional durability and protection against fraud with this Lamination Module from Evolis. This module is an accessory for the Primacy ID badge printer, featuring infrared connectors that communicate with the printer for seamless production of any CR-80 sized card with a thickness between 30 and 40 mil. It can laminate one of the sides of the card in a single pass, or both sides by flipping the card over.
This version of the laminator comes with a control panel with an on/off button and six LED status lights. These LEDs are used to indicate any problems with either the printer and the laminator, including running out of ribbons or necessary cleaning of one of the units. Included with the module is an output hopper, the necessary connection materials, a CD-ROM with the printer driver, and a power supply.
Evolis S10212 Specs
| Compatibility | Evolis Primacy printers (firmware update may be required) |
| Lamination | Single-sided or dual-sided |
| Display | Control panel with six LEDs |
| Output Hopper Capacity | 100 cards |
| Ribbon Options | Transparent patch, 0.5 or 1 mil (600 prints/roll) Holographic patch, 0.6 or 1 mil (600 prints/roll) Patch with contact chip cutout, 0.5 or 1 mil (600 prints/roll) Patch with magnetic stripe cutout, 0.5 or 1 mil (600 prints/roll) Transparent varnish (1200 prints/roll) Continuous holographic varnish (1200 prints/roll) Registered holographic varnish (1200 prints/roll) |
| Card Type | PVC Composite PVC PET Recycled PET ABS1 Special varnished cards |
| Card Sizes | ISO CR-80, 2.13 x 3.37" (5.4 x 8.6 cm) |
| Card Thickness | 30 to 40 mil (0.76 to 1.00 mm) |
| Operating Conditions | Temperature: 59 to 86°F (15 to 30°C) Humidity: 20 to 65%, non-condensing |
| Storage Conditions | Temperature: 23 to 158°F (-5 to 70°C) Humidity: 20 to 70%, non-condensing |
| Power Requirements | 100-240 VAC, 50-60 Hz, 2.0 A / 24 VDC, 6.25 A |
In the Box
- Evolis Lamination Module for Primacy ID Card Printers
- Output Hopper
- Fork Connector
- Infrared Connection Kit
- CD-ROM with Printer Driver
- Cleaning Material
- Power Supply
- 3-Year Manufacturer Warranty
No posts found
