Premier Imaging ECO Print Shield Protective Coating (Satin, Gallon)

Premier Imaging ECO Print Shield Protective Coating (Satin, Gallon)

Protect your prints from moisture, light, humidity, atmospheric contaminants, abrasion, and fingerprints with a gallon container of satin ECO Print Shield Protective Coating from Premier Imaging. Applying Eco Print Shield is easily accomplished with a roller, brush, or HPLV spray gun. A safe, water-based formulation, there`s zero health risk from volatile solvents. Better yet, Print Shield is non-crackling and won`t flake off. The long-lasting, non-yellowing and non-reactive, formula is compatible with all inks. Compiling virtue from all it`s not, Print Shield crowns these achievements by also being non-toxic and requiring no special handling.

For best results, use two coats of glossy finish as a primer, and a third coat in your choice of finish. This product is designed to always have a gloss finish primer. Gloss is needed as a primer because other finishes have matting agents which will build up and reduce your D-max and lower contrast. When applying multiple coats, allow each coat to completely dry before starting subsequent coats. Print Shield is abrasion, ozone, and water-resistant.

Applications: Fine art, Photography, Giclee reproduction

Water Based

Non-cracking formula, stretchable

Non-reactive

Ozone and water resistant

Non-yellowing

Abrasion-resistant

Non-toxic

Exceeds V.O.C. requirements