DJI Avata FPV Drone with Essential Accessory Kit

The DJI Avata FPV Drone with Essential Accessory Kit from is designed to support the thrilling first-person flying of the Avata with important accessories to keep the drone safe and optimize your day of filming. Included are a Lume Cube STROBE anti-collision light, landing pad, 128GB microSD card, and an optics cleaning kit. The pad and light keep the Avata safe during takeoff, in flight, and when landing. As you pilot from up to 6.2 miles away in order to film 4K100-stabilized, ultra-wide video, you can conveniently capture even more footage than normal with the extra 128GB microSD. The optics cleaning kit, with its brushes, blower, and cleaning liquid, helps ensure all of your content comes out crystal clear.

DJI Avata FPV Drone

Safely film steady, ultra-wide 4K stabilized video indoors or outside, in and around objects, with the DJI Avata FPV Drone. Sporting what some call a cinewhoop design, the Avata comes in a palm-sized form factor with all four propellers protected with attached guards. This allows for close-up filming indoors, near people, and through small openings without risking damage or injury to people and property. If the Avata does come in contact, it can just bounce off and keep flying. For a more immersive experience with intuitive controls, you can opts to pair the Avata with optional Goggles 2, FPV Goggles V2, and the DJI Motion Controller

Wide-Angle Stabilized Video The Avata comes equipped with a 48MP 1/1.7 CMOS sensor, which supports up to 4K video at 100 fps. This footage is shot with an ultra-wide 155° FOV that mimics how we see with our own eyes for a natural and realistic experience. The footage is stabilized in two ways using RockSteady 2.0 EIS and HorizonSteady EIS. RockSteady EIS works to reduce camera shake, while HorizonSteady locks the Avata's footage to a level horizon. O3+ Transmission Utilizing 2T2R omnidirectional antennas, the Avata can feed your controller or compatible FPV goggles (both not included) with Full HD 1080p video at up to 100 fps, with only a 30 ms latency, and at a 50 Mb/s data transfer rate. The footage is compressed with H.265 to save on storage space when saving videos, and it can be sent from up to 6.2 miles away. Obstacle Sensing A downward binocular vision sensor and ToF depth sensor work conjunctively to detect obstacles on the ground during flight. This gives pilots the ability to safely fly low-altitude and indoor flights. Turtle Mode The propeller guards usually let the Avata take a bump and keep on flying, but what if the Avata hits hard enough to fall and land on its back like a turtle? Just activate Turtle Mode with a few taps to have the Avata flip itself right side up and get back to flying. Virtual Flight App Designed for Windows, iOS 12.0+, and Android 9.0+, this software lets new and experienced pilots practice flying indoors and outside, honing their skills from a variety of preinstalled simulated scenarios. Additional Features

• Shoot in D-Cinelike mode to allow for advanced color grading during post-production
• Ducted aerodynamic design for up to 18 minutes of flight time
• Three speed modes: Normal (up to 17.9 mph), Sport (up to 31.3 mph), and Manual (up to 60.4 mph)
• Take still JPEG photos at up to 4000 x 3000 resolution
• Capable of withstanding Level 5 winds of up to 24 mph
• microSD slot for optional cards up to 256GB
• Compatible with FPV Remote Controller 2, Goggles V2, FPV Goggles V2, and DJI Motion Controller

EAN: 190021061576 Lume Cube STROBE Anti-Collision Light for Drones

Satisfy FAA guidelines by adding anti-collision strobe lighting to your drone so you can fly at night with this STROBE Anti-Collision Light from Lume Cube. Each STROBE light includes a 3M dual-lock mount and a micro-USB charging cable, and it is compatible with any drone.

Each light weighs less than an ounce, so it won't add much weight to your drone setup. For different patterns, it allows you to configure it to fast strobe, slow strobe, or constant light, and it can be seen 360° from over three miles away. A micro-USB cable is included to charge the built-in battery which takes less than 60 minutes, and it lasts approximately two hours when running on the fast strobe setting. One red and one green cap are included to pop onto the top of the light and change the STROBE color from its default white.

Bright anti-collision drone lighting that can be seen over three miles away ...