FoxFury D3060 Light System for Phantom 4/4 Pro
EAN: 856470005270
Mount two D3060 trade-compliant drone lights to any model of the DJI Phantom 4 with this D3060 Light System for Phantom 4/4 Pro from FoxFury. Locking onto the legs of the Phantom 4, this system ensures that the lights stay securely attached to the drone during flight and beyond. Weighing just 2.2 oz with both lights on board, flight time is only minimally affected.
D3060 Trade-Compliant Drone Lights
The two included D3060-TC lights meet FAA and global regulations for UAV night flight requirements and allow you to fly your drone after the sun goes down. These small-format utility lights may be used for navigation or as anti-collision beacons with an output of up to 200 lumens in continuous high, low, or strobe light modes.
DJI Phantom 4 Mounts
The P4 mounts are specifically designed to work on all past and current versions of the DJI Phantom 4 and allow you to securely mount two D3060-TC lights onto your drone.
Compatibility
EAN: 856470005270
Mount two D3060 trade-compliant drone lights to any model of the DJI Phantom 4 with this D3060 Light System for Phantom 4/4 Pro from FoxFury. Locking onto the legs of the Phantom 4, this system ensures that the lights stay securely attached to the drone during flight and beyond. Weighing just 2.2 oz with both lights on board, flight time is only minimally affected.
D3060 Trade-Compliant Drone Lights
The two included D3060-TC lights meet FAA and global regulations for UAV night flight requirements and allow you to fly your drone after the sun goes down. These small-format utility lights may be used for navigation or as anti-collision beacons with an output of up to 200 lumens in continuous high, low, or strobe light modes.
Each light offers dual-LED functionality that allows for independent or simultaneous operation of the respective 30° front and 60° dorsal lights with 5700K color temperature. The rechargeable LiPo battery operates from 1.5 to 3 hours on a single charge, and it recharges within 1.5 hours via an integrated USB Type-C port. The sturdy polycarbonate body is impact resistant and waterproof, and the trade-compliant unit is fully assembled in the USA.
DJI Phantom 4 Mounts
The P4 mounts are specifically designed to work on all past and current versions of the DJI Phantom 4 and allow you to securely mount two D3060-TC lights onto your drone.
Compatibility
- Phantom 4
- Phantom 4 Pro
- Phantom 4 Pro V2
- Phantom 4 Pro Multispectral
- Phantom 4 Pro RTK
FoxFury 700-P4-D Specs
Lights
| Output | 60 to 200 Lumens (Front) 50 to 160 Lumens (Dorsal) |
| Beam Distance | 65` / 20 m (Front); 40` / 12 m (Dorsal) |
| Beam Angle | 30° (Front); 60° (Dorsal) |
| Color Temperature | 5700K |
| CRI Rating | 70 |
| Modes | 3 (High, Low, Strobe) |
| Strobe Rate | 90 Cycles Per Minute |
| Impact Resistance | 9.8` / 3 m |
| Water Resistance | Waterproof |
| Flammability/Fire Resistance | Meets Requirements of NFPA 1971-8.6 (2013) |
| Ingress Protection | IPX6 |
| Power Source and Consumption | Rechargeable LiPo Battery System |
| Battery & Capacity | 3.7 VDC, 560 mAh |
| Battery / Runtime | Front Light: 1.5 Hours (High); 2.5 Hours (Low) Dorsal Light: 1.7 Hours (High); 3 Hours (Low) Strobe Front or Dorsal: 2 Hours (High) Strobe Front and Dorsal: 1.5 Hours (Each) |
| Recharge Time | 1.5 Hours |
| Certifications | CE-EMC |
| Material of Construction | Polycarbonate Body Nylon Rear, Base/MOLLE Mount Silicone Switch |
| Operating Temperature Range | -4 to 300°F / -20 to 149°C |
| Dimensions | 1.3 x 2.3 x 0.9" / 33 x 58 x 23 mm |
| Weight | 1.1 oz / 31.2 g |
Mounting Components
| Mounting Kit | Phantom 4 Drone Mount: Length: 6.97" / 177 mm Height: 3.36" / 85.3 mm Weight: 1 oz / 28.4 g Snap Mount: Dimensions: 1.8 x 0.63 x 0.44" / 46 x 16 x 11.2 mm Weight: .08 oz / 2.3 g |
| Total Weight | 4.36 oz / 123.8 g |
| Flammability/Fire Resistance | Meets Requirements of NFPA 1971-8.6 (2013) |
| Impact Resistance | 9.8` / 3 m (Drop) |
| Certification | CE-EMC |
| Ingress Protection | IPX6 |
| Material of Construction | Nylon and Carbon Fiber |
| Operating Temperature | -4 to 300°F / -20 to 149°C |
Packaging Info
| Package Weight | 0.68 lb |
| Box Dimensions (LxWxH) | 9.1 x 6.5 x 4.7" |
In the Box
- FoxFury D3060 Light System for Phantom 4/4 Pro
- 2 x Phantom 4 Drone Mount
- 2 x Snap Mount for Phantom 4
- 2 x Thumbscrew
- 2-Year Manufacturer Warranty
No posts found
