Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
FoxFury EXOLANDER D3060 Light System for DJI Mavic 2 Pro
EAN: 850037893041
Fly your drone worry-free even after the sun goes down with FAA and global regulations compliance with the EXOLANDER D3060 Light System for DJI Mavic 2 Pro from FoxFury. The system comes with two D3060 trade-compliant lights, the EXOLANDER mounting gear, landing skids, and a saddle mount that can carry up to five D3060 fixtures.
D3060 Trade-Compliant Drone Lights
The two included D3060 lights are small-format utility lights that may be used for navigation or as anti-collision beacons with an output of up to 200 lumens in continuous high, low, or strobe light modes. Each light offers dual-LED functionality that allows for independent or simultaneous operation of the respective 30° front and 60° dorsal lights with 5700K color temperature.
Saddle Mount
The saddle mount connects the EXOLANDER frame to the DJI Mavic 2 Pro and can be used to hold up to five D3060 lights. Two of the D3060 lights are included and can serve as anti-collision lights for night flight regulation compliance.
EXOLANDER
This apparatus securely supports the D3060 drone lights for maintaining proper CG (Center of Gravity) on the DJI Mavic 2 Pro. The EXOLANDER has 10 hard points for mounting various accessories, and it may be attached/removed from the Mavic 2 aircraft without tools.
Landing Skids
The landing skids allow the DJI Mavic 2 Pro to land on snow, mud, and uneven surfaces, protecting the camera from impact and stabilizing the aircraft when landing.
EAN: 850037893041
Fly your drone worry-free even after the sun goes down with FAA and global regulations compliance with the EXOLANDER D3060 Light System for DJI Mavic 2 Pro from FoxFury. The system comes with two D3060 trade-compliant lights, the EXOLANDER mounting gear, landing skids, and a saddle mount that can carry up to five D3060 fixtures.
D3060 Trade-Compliant Drone Lights
The two included D3060 lights are small-format utility lights that may be used for navigation or as anti-collision beacons with an output of up to 200 lumens in continuous high, low, or strobe light modes. Each light offers dual-LED functionality that allows for independent or simultaneous operation of the respective 30° front and 60° dorsal lights with 5700K color temperature.
The rechargeable LiPo battery operates from 1.5 to three hours on a single charge and recharges within 1.5 hours via an integrated USB Type-C port. The sturdy polycarbonate body is impact resistant and waterproof, and the trade-compliant unit is fully assembled in the USA.
Saddle Mount
The saddle mount connects the EXOLANDER frame to the DJI Mavic 2 Pro and can be used to hold up to five D3060 lights. Two of the D3060 lights are included and can serve as anti-collision lights for night flight regulation compliance.
EXOLANDER
This apparatus securely supports the D3060 drone lights for maintaining proper CG (Center of Gravity) on the DJI Mavic 2 Pro. The EXOLANDER has 10 hard points for mounting various accessories, and it may be attached/removed from the Mavic 2 aircraft without tools.
Landing Skids
The landing skids allow the DJI Mavic 2 Pro to land on snow, mud, and uneven surfaces, protecting the camera from impact and stabilizing the aircraft when landing.
FoxFury 700-XDS-M2P Specs
Lights
| Output | 60 to 200 Lumens (Front) 50 to 160 Lumens (Dorsal) |
| Beam Distance | 65` / 20 m (Front); 40` / 12 m (Dorsal) |
| Beam Angle | 30° (Front); 60° (Dorsal) |
| Color Temperature | 5700K |
| CRI Rating | 70 |
| Modes | 3 (High, Low, Strobe) |
| Strobe Rate | 90 Cycles per Minute |
| Impact Resistance | 9.8` / 3 m |
| Water Resistance | Waterproof |
| Flammability/Fire Resistance | Meets Requirements of NFPA 1971-8.6 (2013) |
| Ingress Protection | IPX6 |
| Power Source and Consumption | Rechargeable LiPo Battery System |
| Battery & Capacity | 3.7 VDC, 560 mAh |
| Battery / Runtime | Front Light: 1.5 Hours (High); 2.5 Hours (Low) Dorsal Light: 1.7 Hours (High); 3 Hours (Low) Strobe Front or Dorsal: 2 Hours (High) Strobe Front and Dorsal: 1.5 Hours (Each) |
| Recharge Time | 1.5 Hours |
| Certifications | CE-EMC |
| Material of Construction | Polycarbonate Body Nylon Rear, Base/MOLLE Mount Silicone Switch |
| Operating Temperature Range | -4 to 300°F / -20 to 149°C |
| Dimensions | 1.3 x 2.3 x 0.9" / 33 x 58 x 23 mm |
| Weight | 1.1 oz / 31.2 g |
Mounting Components
| Mounting Kit | Dimensions: Saddle Mount: 4.74 x 2.91 x 2.8" / 120.5 x 74 x 71.1 mm EXOLANDER: 6.8 x 6.5 x 4.8" / 173.2 x 163.8 x 123 mm Landing Skids (Each): 8.67 x 0.97 x 0.6" / 220 x 24.7 x 15.2 mm Weight: Saddle Mount: 0.92 oz / 26.3 g EXOLANDER: 4.05 oz / 114.7 g Landing Skids (Each): 0.45 oz / 12.8 g Landing Skids (Total): 0.9 oz / 25.6 g |
| Flammability/Fire Resistance | Meets Requirements of NFPA 1971-8.6 (2013) |
| Impact Resistance | 9.8` / 3 m (Drop) |
| Certification | CE-EMC |
| Ingress Protection | IPX6 |
| Material of Construction | Nylon and Carbon Fiber |
| Operating Temperature | -4 to 300°F / -20 to 149°C |
In the Box
- FoxFury EXOLANDER D3060 Light System for DJI Mavic 2 Pro
- Saddle Mount
- EXOLANDER Rugo Mount
- 2 x Landing Skid
- 2-Year Manufacturer Warranty
No posts found
