Sungrow Hybrid high-voltage inverter with emergency power output SH10RT
These new three-phase hybrid inverters have a three-phase backup power output with 100% unbalanced load capability. Together with the high-voltage battery connection and 2 independent MPP trackers, the Sungrow inverter leaves nothing to be desired. Up to date, this device is configured via iSolarCloudAssistant and sends its data to the free iSolarCloud portal or iSolarCloud app via the already integrated Wi-Fi or Ethernet interfaces. RS485 (Modbus RTU) and Ethernet (Modbus TCP) can be used to connect third-party data loggers. A 3-phase smart meter is already included.
External connections, a generous connection area and an integrated bubble level enable quick installation.
If PV modules with currents greater than 13.5 A are used, the inverter may slightly down-regulate on a few peak days a year!
Product advantages
- Input voltage range from 200-950 V
- High efficiency of up to 98.4 %
- Natural convection
- AC + DC overvoltage protection 2 integrated
- Connections are external, no need to open the inverter
- Integrated bubble level
- SG-ready contact available (for: control of e.g. heat pump)
- Noise emission 30dB (A)
Use cases:
- Operation without battery as an inverter only
- DC operation with PV and battery
- AC operation without PV and with battery
Product features Sungrow Hybrid HV SH10RT:
- Mains connection: 3-phase
- AC power: 10.0 kVA (10.0 kW nom. / 12 kW 5min.) emergency power via separate output
- Reverse polarity protection
- MPP trackers: 2
- MPPT 1: 1 MC4 input MPPT 2: 2 MC4 inputs
- Battery connection
- Interfaces: Ethernet
- Cable cross-section AC connection 6 – 10 mm² possible
- Cable cross-section DC connection 6 – 10 mm² possible
- Dimensions: 540 x 460 x 170 mm (H x W x D)
- Weight: 27 kg
- Protection category: IP 65
Scope of delivery
- Inverter
- 3-phase Smart Meter Chint DTSU666 80 A included
- WiNet-S-Modul Wi-Fi adapter
- Wall mount
- Expanding dowel set
- M4 screws and washers
- AC/backup connector set
- Cable end clamp
- PV connectors
- Crimp contact
- SUNCLIX connector set
- LAN connector
- COM connector
- RS485 cable
- OT connection
- Documents
Battery compatibility
The energy storage approval list
If you're looking for emergency power, you've come to the right place! Compact dimensions and low weight with powerful performance - installed faster than any other.
| Phases: | 3 |
| MPP-Tracker: | 2 |
| AC power: | 10 kW |
| MPP voltage range: | 200 - 950 Volt |
| Warranty: | 10 Jahre |
| Communication: | RS485, WiFi, Ethernet |
No posts found
