ClampFit Pro
The ClampFit Pro is Schletter's cost-optimized trapezoidal sheet metal fastener with the same high quality standards. Screw on the ClampFit Pro, place the module on top, tighten the clamps - it couldn't be easier! The trapezoidal roof may have slopes of 8 to 45° and must have a minimum height of 22 mm.
Two thin sheet metal screws 5.5 mm or 6 mm are required for each SingleFix Pro.
Product advantages:
- Pre-assembled
- Quick and easy installation.
- 25 years of warranty
- For ProLine
No posts found
