EAN: 840402011729
The SLA-1 from ART is a rackmountable, two-channel power amplifier designed for studio use. It offers a wide frequency response with very-low noise and distortion for quality audio output. XLR and 1/4 input connectors are provided, along with five-way binding post outputs. Each channel has its own level control on the front panel.
The SLA-1 can operate in stereo or bridged mode, and it features a ground-lift switch to eliminate hum caused by ground loops. The unit offers full-protection circuitry for short circuits, overloads, and overheating. If any faults are detected, the amplifier will disconnect the outputs and automatically return to normal operation when the fault is fixed. The SmartFan cooling system offers silent fan-assisted convection cooling to keep the system running reliably.
1 RU steel and aluminum housing
High-quality audio with low distortion
Individual level controls for each channel
XLR and 1/4 inputs, 5-way binding post outputs
Stereo or bridged operating modes
Ground-lift switch for eliminating hum
LED indicators for power, signal, clip, and protect
SmartFan cooling system is fan-assisted for quiet, reliable operation
Protection circuitry prevents damage from overheating, overloads, and short circuits. It will disconnect the outputs when a fault is present, and resume normal operation when the fault has been removed
ART SLA-1 Specs
Amplifier
| Number of Channels | 2 |
| Power Rating | 8 Ohms: 100 W RMS per Channel 260 W RMS Bridged 4 Ohms: 130 W RMS per Channel |
| Load Impedance / Voltage | 4 / 8 / 16 Ohms per Channel |
Performance
| Frequency Response | 10 Hz to 40 kHz ±0.5 dB |
| Damping Factor | > 100 |
| Input Sensitivity | 1 V (at 8 Ohms) |
| Input Impedance | 44 Kilohms (Balanced) 22 Kilohms (Unbalanced) |
| THD | < 0.05% (Typical) |
Signal Processing
| DSP | Yes |
| Crossover | Yes |
| Limiting | Yes |
Connectivity
| Analog Audio I/O | 2 x 5-Way Binding Post Pair 4-Pin Output 2 x XLR 3-Pin Female Input 2 x 1/4" TRS Female Input |
Power
| AC Input Power | 240VAC, 60 Hz |
| AC Power Connector | 1 x IEC 15 A |
| Power Consumption | 600 W (Max) |
Physical
| Display & Indicators | 1 x Blue LED (Power) 2 x Red LED (Protect) 2 x Red LED (Clip) 2 x Green LED (Signal) |
| Rackmount Size | 1 RU |
| Cooling | Fan (Variable Speed) |
| Dimensions | 19.0 x 1.8 x 9.5" / 483.0 x 44.0 x 241.0 mm |
| Weight | 13.2 lb / 6 kg |
Packaging Info
| Package Weight | 14.6 lb |
| Box Dimensions (LxWxH) | 23 x 13.2 x 4.7" |
In the Box
- ART SLA-1 100W 2-Channel Amplifier
- Power Cord
- 3-Year Manufacturer Warranty
No posts found
