Bogen AFI-115 Subwoofer System (White)
The Bogen Communications white AFI-115 Subwoofer System from Apogee Sound International features a high-power, long-excursion, fluid-treated 15 (381mm) cone driver capable of delivering powerful and tight bass. It works in combination with the AFI-4, AFI-3, or other smaller AFI full-range speakers. The AFI-115 is suitable for multi-media presentations, clubs, houses of worship, discos, concert halls, and theaters.
Low Frequency
One Apogee 15 (381mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
Input Connectors
Barrier strip, screw type #8
Compatible Processors
AFI Main Frame Controller Chassis (using AFI-115 Module) or DLC24
Recommended Crossover
Contact Apogee for full technical data on other DSP-based processors
Handles
Two handles - one at the top, one at the bottom, designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable finish on perforated steel
Rigging Hardware
Fourteen rigging points four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel points can be type 3/8 -16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
Rectangular, band-pass bass
Cabinet Construction
Multi-ply hardwood with stainless-steel fasteners
The Bogen Communications white AFI-115 Subwoofer System from Apogee Sound International features a high-power, long-excursion, fluid-treated 15 (381mm) cone driver capable of delivering powerful and tight bass. It works in combination with the AFI-4, AFI-3, or other smaller AFI full-range speakers. The AFI-115 is suitable for multi-media presentations, clubs, houses of worship, discos, concert halls, and theaters.
Low Frequency
One Apogee 15 (381mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
Input Connectors
Barrier strip, screw type #8
Compatible Processors
AFI Main Frame Controller Chassis (using AFI-115 Module) or DLC24
Recommended Crossover
Contact Apogee for full technical data on other DSP-based processors
Handles
Two handles - one at the top, one at the bottom, designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable finish on perforated steel
Rigging Hardware
Fourteen rigging points four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel points can be type 3/8 -16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
Rectangular, band-pass bass
Cabinet Construction
Multi-ply hardwood with stainless-steel fasteners
Bogen AFI-115 Specs
| Format | Front-loaded |
| Dispersion | Omnidirectional |
| Frequency Response | 40 Hz to 125 Hz ± 3 dB (1m on axis) |
| Maximum SPL | 122 dB continuous /128 dB peak |
| PTML (Peak Transient Mechanical Limit) | 139 dB |
| Sensitivity | 97 dB |
| Nominal Impedance | 8 © |
| Maximum Power Handling | 400 W continuous / 1600 W peak |
| Dimensions | 21.0 x 20.9 x 22.3" (534.0 x 531.0 x 567.0 mm) |
| Weight | 71 lb (33 kg) |
In the Box
- Bogen AFI-115 Subwoofer System (White)
- 2-Year Manufacturer Warranty
No posts found
