ART SLA-2 - 2-Channel Rackmount Power Amplifier (200W Per Channel at 8 Ohms)
EAN: 840402016359
The SLA-2 from ART is a rack mountable two-channel power amplifier designed for studio use. It offers a wide frequency response with very low noise and distortion for quality audio output. XLR, 1/4 , and Euroblock input connectors are provided, along with five-way binding post outputs. Each channel has its own level control on the front panel.
The SLA-2 can operate in stereo or bridged mode, and features a ground-lift switch to eliminate hum caused by ground loops. The unit offers full protection circuitry for short circuits, overloads, and overheating. If any faults are detected, the amplifier will disconnect the outputs and automatically return to normal operation when the fault is fixed. The SmartFan cooling system offers silent fan-assisted convection cooling to keep the system running reliably.
1U steel housing
High quality audio with low distortion
Individual level controls for each channel
XLR, 1/4 , and Euroblock inputs, 5-way binding post outputs
Stereo or bridged operating modes
Ground-lift switch for eliminating hum
LED indicators for power, signal, clip, and protect
SmartFan cooling system is fan-assisted for quiet, reliable operation
Protection circuitry prevents damage from overheating, overloads, and short circuits. It will disconnect the outputs when a fault is present, and resume normal operation when the fault has been removed
EAN: 840402016359
The SLA-2 from ART is a rack mountable two-channel power amplifier designed for studio use. It offers a wide frequency response with very low noise and distortion for quality audio output. XLR, 1/4 , and Euroblock input connectors are provided, along with five-way binding post outputs. Each channel has its own level control on the front panel.
The SLA-2 can operate in stereo or bridged mode, and features a ground-lift switch to eliminate hum caused by ground loops. The unit offers full protection circuitry for short circuits, overloads, and overheating. If any faults are detected, the amplifier will disconnect the outputs and automatically return to normal operation when the fault is fixed. The SmartFan cooling system offers silent fan-assisted convection cooling to keep the system running reliably.
1U steel housing
High quality audio with low distortion
Individual level controls for each channel
XLR, 1/4 , and Euroblock inputs, 5-way binding post outputs
Stereo or bridged operating modes
Ground-lift switch for eliminating hum
LED indicators for power, signal, clip, and protect
SmartFan cooling system is fan-assisted for quiet, reliable operation
Protection circuitry prevents damage from overheating, overloads, and short circuits. It will disconnect the outputs when a fault is present, and resume normal operation when the fault has been removed
ART SLA-2 Specs
| Number of Channels | 2 |
| Power Rating | 4 Ohms: 280 W RMS per Channel 8 Ohms: 200 W RMS per Channel 560 W RMS Bridged |
Performance
| Frequency Response | 10 Hz to 40 kHz ±0.5 dB |
| Damping Factor | > 100 |
| Input Sensitivity | 1 V (at 8 Ohms) |
| Input Impedance | 44 Kilohms (Balanced) 22 Kilohms (Unbalanced) |
| THD | < 0.05% (Typical) |
Connectivity
| Analog Audio I/O | 2 x 5-Way Binding Post Pair Output 2 x XLR Female Input 2 x 1/4" Input 1 x Block 6-Pin Input |
Power
| AC Input Power | 240VAC, 60 Hz |
| Power Consumption | 1000 W (Max) |
Physical
| Display & Indicators | 1 x Blue LED (Power) 2 x Red LED (Protect) 2 x Red LED (Clip) 2 x Green LED (Signal) |
| Cooling | Fan (Variable Speed) |
| Dimensions | 19.0 x 1.8 x 13.5" / 483.0 x 44.0 x 343.0 mm |
| Weight | 19.8 lb / 9 kg |
Packaging Info
| Package Weight | 22.2 lb |
| Box Dimensions (LxWxH) | 23.25 x 17.65 x 4.75" |
In the Box
- ART SLA-2 - 2-Channel Rackmount Power Amplifier (200W Per Channel at 8 Ohms)
- Power Cord
- 3-Year Manufacturer Warranty
No posts found
