Visionsmith ReLamp 500 LED for Mole Baby-Baby Fresnel (Tungsten)
EAN: 714983289528
A clever, fast, and seamless solution for conversion from legacy halogen fixtures to their LED counterparts, the Tungsten-Balanced ReLamp 500 LED for Mole Baby-Baby Fresnel from Visionsmith brings you all of the benefits of a retro-fit and none of the hassles - in fact it s not even a retrofit, it s a simple lamp swap! The ReLamp 500 fits into the very same GY9.5 Bi-Post base that halogens do and outputs the approximate power that halogens do while consuming just 55W of electricity, eliminating heat that might make the talent uncomfortable, and high air-conditioning costs to cool the studio. Typically, the ReLamp 500 will save you 80% of air-conditioning and running costs with an ROI of mere months.Very accurate color rendering - matches tungsten lamp without correction Less than half the cost of any comparable LED Fresnel solution Brighter: 55W LED has the approximate output of a 500W halogen Full-range dimming on your existing AC dimmers - without color shift Flicker-free at any frame rate Safe: no burns, no gloves, no fire hazard, does not explode like halogen No heat on subject or talent Green: the easiest way to make your business sustainable
Uncompromising Color Quality
Cinewhite LEDs come from the cutting edge of LED technology. With impeccable color rendering and Purebeam technology, the light quality must be seen to be appreciated.
Plays Well with Others
Can you tell which is the halogen and which is the LED? The color is just what you hoped for: it gels correctly, blends with your existing fixtures, and projects an impressive light field.
No Heat on Your Subject
Visionsmith ReLamps run barely warm to the touch.
Fast ROI: Your Studio Can Save 80% off the Power Bill with ReLamp LEDs
ReLamp LEDs are eight times more efficient than halogen at putting light on the target. Additionally, there s no heat, while a halogen grid is like a grid of industrial space-heaters, compensated by heavy-duty air conditioning. If you re running lights for 12 hours a day, the numbers add up fast.
Big Benefits
ReLamp LEDs experience no color shift with dimming, so fussing with scrims is a thing of the past. AC dimming Smart cooling Rugged construction
A Fit for Each Fixture
This isn t anything like an LED retrofit, it s just a bulb swap.
Get 4x More for Your Budget
Upgrading to LED is no longer a process of throwing out all your old favorite lights, and rewiring to support the new expensive LEDs. You can literally just upgrade from a halogen lamp to a ReLamp LED. It s much faster. There is no rewiring at all. It costs four times less in most cases. You still get all the benefits of LEDs.
Reliability Guaranteed
ReLamp products are backed by a full two-year replacement warranty, an optional extended warranty, and a 30-day money-back guarantee.
Compatibility
This Relamp 500W is ideally compatibile with the Mole Baby-Baby Fresnel. Although not an ideal fit, it can also be used with the ARRI 1K Plus, T1, and ST1 Fresnels.
EAN: 714983289528
A clever, fast, and seamless solution for conversion from legacy halogen fixtures to their LED counterparts, the Tungsten-Balanced ReLamp 500 LED for Mole Baby-Baby Fresnel from Visionsmith brings you all of the benefits of a retro-fit and none of the hassles - in fact it s not even a retrofit, it s a simple lamp swap! The ReLamp 500 fits into the very same GY9.5 Bi-Post base that halogens do and outputs the approximate power that halogens do while consuming just 55W of electricity, eliminating heat that might make the talent uncomfortable, and high air-conditioning costs to cool the studio. Typically, the ReLamp 500 will save you 80% of air-conditioning and running costs with an ROI of mere months.
Re-lamping is seamless, challenging you to differentiate between the halogen and LED fixtures. And the accuracy and precision of color rendering is indisputable as evidenced by the ReLamp s CRI/TLCI ratings of 94/95. Ready for worldwide use the ReLamp 500 runs on 90-250 VAC voltage and can be dimmed from 0 to 100%.
The LED Fresnel Solution
Uncompromising Color Quality
Cinewhite LEDs come from the cutting edge of LED technology. With impeccable color rendering and Purebeam technology, the light quality must be seen to be appreciated.
Plays Well with Others
Can you tell which is the halogen and which is the LED? The color is just what you hoped for: it gels correctly, blends with your existing fixtures, and projects an impressive light field.
No Heat on Your Subject
Visionsmith ReLamps run barely warm to the touch.
Fast ROI: Your Studio Can Save 80% off the Power Bill with ReLamp LEDs
ReLamp LEDs are eight times more efficient than halogen at putting light on the target. Additionally, there s no heat, while a halogen grid is like a grid of industrial space-heaters, compensated by heavy-duty air conditioning. If you re running lights for 12 hours a day, the numbers add up fast.
Big Benefits
ReLamp LEDs experience no color shift with dimming, so fussing with scrims is a thing of the past.
A Fit for Each Fixture
This isn t anything like an LED retrofit, it s just a bulb swap.
Get 4x More for Your Budget
Upgrading to LED is no longer a process of throwing out all your old favorite lights, and rewiring to support the new expensive LEDs. You can literally just upgrade from a halogen lamp to a ReLamp LED. It s much faster. There is no rewiring at all. It costs four times less in most cases. You still get all the benefits of LEDs.
Reliability Guaranteed
ReLamp products are backed by a full two-year replacement warranty, an optional extended warranty, and a 30-day money-back guarantee.
Compatibility
This Relamp 500W is ideally compatibile with the Mole Baby-Baby Fresnel. Although not an ideal fit, it can also be used with the ARRI 1K Plus, T1, and ST1 Fresnels.
Visionsmith VS-EGNT Specs
| Replacement | 55 W LED Replaces EGN 500 W Halogen |
| Color Temperature | 3200K (+/- 100K Nominal) Estimated Color Shift Over Lifetime: +/- 5.0% |
| Color Accuracy | CRI/TLCI: 94/95 |
| Beam Angle | 110° |
| Viewing Area | Light Emitting Area: 0.55" / 14 mm |
| Material of Construction | Metal Enclosure |
| Lamp Base | G22 Bi-Post Base |
| Power Supply (AC) | 90 to 250 VAC 50/60 Hz |
| Power Consumption | 55 W Max |
| Flicker Free | Yes |
| Dimming | 0 to 100% Continuous on Typical Triac AC Dimmers |
| Operating Temperature | -4 to 113°F / -20 - 45°C |
| Storage Temperature | -4 to 158°F / -20 - 708°C |
| IP Rating | IP20 |
| Lamp Life | 50,000 Hours |
| Fan Noise | S Mode: 15 dB L Mode: 18 dB |
| Dimensions | Not Specified by Manufacturer |
| Weight | 0.66 lb / 0.340 kg |
Packaging Info
| Package Weight | 0.965 lb |
| Box Dimensions (LxWxH) | 8.2 x 5.5 x 4.8" |
In the Box
- Visionsmith ReLamp 500 LED for Mole Baby-Baby Fresnel (Tungsten)
- 2-Year Manufacturer Warranty
No posts found
