EAN: 847628579507
The PowerTrigger 16 Channel AC Transmitter and Receiver Set from Impact contains everything you ll need to wirelessly trigger your studio AC flash units at distances up to 75 . The set includes a 16 channel transmitter and receiver as well as a 2.5mm sub-mini to PC cable, a 3.5mm to 1/4 monoplug adapter and a pre-installed battery for the transmitter.
The low-profile 1.2 x 1.6 x 2.8 PowerTrigger transmitter has a hot shoe for your camera, a test button, and 16 separate channels operating on the 433 MHz frequency to prevent interference from other devices. Channels are chosen on both the transmitter and receiver by configuring 4 DIP switches in 1 of 16 permutations on both the transmitter or receiver for wireless triggering from up to 75 away with flash sync speeds of up to 1/200 second. The transmitter runs on a pre-installed, 23A battery that can last up to 2 years with normal use.
Unlike the transmitter, the PowerTrigger receiver doesn t use batteries and is instead powered by the same AC cord that s used for your monolight. Think of it as an in-line receiver. Simply plug the end of the power cord into the receiver then plug the receiver s power cord into the head s power outlet. Finally, plug the PowerTrigger s attached 3.5mm sync cable into the flash. A 1/4 mono plug adapter is provided if the head doesn t have 3.5mm input. If you don t know what your flash head s sync voltage is, or if you re using an older unit you might want to purchase a Wein Safe-Sync adapter (MFR# 990-510) to insure that the sync voltage remains under 6V. The Safe Sync s monoplug attachment can be easily adapted to 3.5mm if necessary.
433 MHz Radio Signal
Using a powerful radio signal allows you to trigger your studio flash without line of sight positioning
Flash Sync Speed of up to 1/200 Sec.
Take advantage of sync speeds up to 1/200 of a second with compatible cameras
Wireless
Cable-free triggering allows you to activate a studio flash from up to 75 (22.8 meters) away without a physical connection
16 User-selectable Channels
Multiple channels allow you to change your receiver settings to avoid interference from other wireless devices
LED Indicator
Confirms sending/receiving signals, and active AC power
Multi-voltage
100-230 VAC, 50/60 Hz
Long-lasting Transmitter Battery
Included user-replaceable 12V 23A alkaline battery lasts up to 2 years
No posts found
