EAN: 847628579514
The PowerTrigger 16 Channel Receiver from Impact is a convenient tool when used with its optional transmitter that allows you to wirelessly trigger your studio AC flash unit at distances up to 75 .
Unlike the transmitter, the PowerTrigger receiver doesn t use batteries and is instead powered by the same AC cord that s used for your monolight. Think of it as an in-line receiver. Simply plug the end of the power cord into the receiver then plug the receiver s power cord into the head s power outlet. Finally, plug the PowerTrigger s attached 3.5mm sync cable into the flash. A 1/4 mono plug adapter is provided if the head doesn t have 3.5mm input. If you don t know what your flash head s sync voltage is, or if you re using an older unit you might want to purchase a Wein Safe-Sync adapter (MFR# 990-510) to insure that the sync voltage remains under 6V. The Safe Sync s monoplug attachment can be easily adapted to 3.5mm if necessary.
AC Receiver / AC Power
The AC-powered receiver does not require the use of batteries
433 MHz Radio Signal
Using a powerful radio signal allows you to trigger your studio flash without line of sight positioning
Flash Sync Speed of up to 1/200 Sec.
Take advantage of sync speeds up to 1/200 of a second with compatible cameras
Wireless
Cable-free triggering allows you to activate a studio flash from up to 75 (22.8m) away without a physical connection
16 User-selectable Channels
Multiple channels allow you to change your receiver settings to avoid interference from other wireless devices
LED Indicator
Confirms sending/receiving signals and active AC power
Multi-voltage
100-230 VAC, 50/60 Hz
Impact PowerTrigger Receiver Specs
Wireless
| Channels | 16 |
| Wireless Range | 75` / 22.8 m |
| Radio Frequency | 433 MHz |
In the Box
- Impact PowerTrigger 16 Channel Studio Receiver
- Monoplug Adapter (3.5 mm to 1/4")
- Instruction Manual
- 2 Years Manufacturer Warranty
No posts found
