Realize the full potential of your flash setup by adding wireless triggering and control with the Phottix Odin II TTL Flash Trigger Transmitter. Compatible with Sony s ADI / P-TTL flash system and equipped with a 2.4 GHz radio transmission system, the Odin II will communicate and trigger receivers or radio-capable flash units at distances up to 328 . To further benefit users, it can be used in a multi-system setup that involve Odin TTL, Strato, and Strato II receivers as well as Mitros+, Indra360, and Indra 500 lights. A major improvement over the previous model is an expansion of channels and the introduction of the Digital ID which gives further control over channels 5-32 to eliminate interference with other systems.
Embracing TTL communication between the camera and flash, automatic exposures can easily be made and more advanced users can take advantage of manual power and zoom control to dial in the exact look they need. Using the five groups, users can also control different groups and flashes with varying settings as well as mix and match TTL and manual units. All of this is easily accessed via the large LCD screen along with direct access buttons for the groups and a rotary dial for quickly adjusting settings.
Additional features include both high-speed sync for TTL flashes as well as the proprietary OverDrive Sync mode for manual studio strobes, both of which allow users to work at shutter speeds up to 1/8000 second. Also, users will be able to remotely control the modeling light of their Indra TTL strobes as well as use an AF assist light when needed. And, it has a mini-USB port for firmware updates. This model is directly compatible with Sony cameras using the Multi Interface Shoe. Cameras that use the older Auto-Lock Accessory Shoe can use an optional adapter to achieve compatibility.
TTL information transmission is possible with Odin TTL receiver, Mitros+ flash, and Indra360/500 TTL lights while manual triggering is possible with Strato and Strato II receivers
Ratio control in A:B mode from 8:1 to 1:8 in 1/2 step increments
Manual power control from 1/1 to 1/128
Ten custom functions
LED indicator light
Exposure compensation of ± 3 EV in 1/3 step increments
Modeling light function
Locking foot
Runs on two AA batteries
Phottix Odin II Transmitter Specs
Wireless
| Channels | 32 |
| Groups | 5 (A, B, C, D, E) |
| Wireless Range | 328` / 100 m |
| Radio Frequency | 2.4 GHz |
General
| Control Modes | ADI, Manual, P-TTL, TTL |
| EV Range | ±3 (1/2, 1/3 Increments) |
| Sync Speed | 1/8000 Sec |
| Power Settings | 1/1 to 1/128 (1/3-Stop Intervals) |
Connectivity
| Inputs/Outputs | 1 x Mini-USB |
Electrical
| Battery Type | 2 x AA |
Physical
| Dimensions | Transmitter: 4.3 x 2.8 x 2.2" / 109 x 72 x 56 mm |
| Weight | 4.5 oz / 128 g |
Packaging Info
| Package Weight | 0.85 lb |
| Box Dimensions (LxWxH) | 6.4 x 5 x 3.5" |
In the Box
- Phottix Odin II TTL Flash Trigger Transmitter for Sony Multi Interface Shoe
- 2 x AA Batteries
- 3.5mm to PC Sync Cable
- 3.5mm to 3.5mm Cable
- 6.3mm Adapter
- USB Cable
- Lanyard
- 2-Year Manufacturer Warranty
No posts found
