Quantum Instruments QLINK for Canon with FreeXwire Receiver Kit

Quantum Instruments FreeXwire QLINK for Canon

EAN: 807955012368

The Quantum FreeXwire QLINK for Canon is a great way to create a mini-studio of Canon remote-controlled flashes. Take any number of Canon shoe-mount flashes, each fitted with a FreeXwire receiver and add a QLINK. Using your Quantum Pilot or TRIO flash on your camera as the master (controller), you can not only wirelessly trigger the flashes, but control their output from -3 stops to +2 stops. Alternately, you can set each flash to Auto and let the remote flash determine its own exposure.

Requires a TRIO or Pilot flash and a FreeXwire receiver plus a QLINK for use.

Quantum Instruments FW8R FreeXwire Wireless Digital TTL Receiver

EAN: 807955011125

The Quantum FreeXwire FW8R Receiver can be used to receive a wireless radio flash trigger signal from an FW10w or FW9T transmitter connected to the camera. Or can be used to receive wireless TTL information when connected to the Qflash T5d and a Dw series QTTL adapter on the camera.

The FW8R receiver can also be used as a receiver hooked up to the camera with a Quantum Two-Step Motor Drive cord to allow for remote wireless triggering of the shutter release. With a 2-step cord you keep your camera s meter and focus function continuously on (as in pressing the shutter button half way).

8 Independent Channels

FreeXwire has eight unique Channel Codes. FreeXwire units set to one Channel cannot activate FreeXwires set to different Channels. You control the Channel Code to make FreeXwire units work together or independently, as required. There are 32 individual Channel/Zone settings at your disposal, and 256 possible lighting combinations.

4 Zone Control Plus Local

FreeXwire controls one Local Zone and four wireless Zones for flash or motor drive. You can activate any one Zone, or any combination of Zones 1,2,3,4 and Local. Switch your lighting instantly, remotely. Select and trigger flashes, cameras, or combinations of them, from your remote position.

Wireless Digital Camera TTL

A FreeXwire connected to a Dw series adapter transmits the camera s f/stop, ISO, and TTL information to any number of remote FreeXwire /Qflash combinations. A local Qflash will synchronize also.

Wireless Auto

Without a TTL adapter, a local Qflash & FreeWire can control exposures of any number of remote Qflash/FreeXwire combinations.

Two Special Motor Drive Features

Two-step cord keeps your camera meter and focus function continuously on (as in pressing the shutter button half way). The camera will be ready for instant shutter release. Or, select motor drive delay to command a camera to wake up , focus and meter, then release the shutter.

Small Size

Compact and light, and antenna folds out of the way for compact storage.